(C044TS) Quartz Flow Cell, 4 mm / 10 mm (dual path) Path, 1.4 mL

Weight	30 g

SKU: C044TS

Original price was: $527.00.Current price is: $475.00.

In Stock

C044TS is a JGS1 quartz flow cell with dual 4 mm and 10 mm optical paths, Four-Way Light geometry and a 1.4 mL nominal capacity. Two opposed M12 threaded openings and a 12.5 × 12.5 mm body make it suitable when you need a compact closed flow cell with multi-face optical access. The listed price is for 1 piece.

In Stock

SKU: C044TS Categories: Cuvettes, Products, Quartz Custom Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C044TS is a JGS1 quartz flow cell that combines dual 4 mm and 10 mm optical paths in one body with Four-Way Light geometry and a 1.4 mL nominal capacity. It is a useful choice when your method needs a closed flow-through format with optical access on all four side faces and threaded end connections for installation into a liquid path.

Path Length: 4 mm / 10 mm (dual path)
Sample Volume (Nominal): 1.4 mL
Opening Configuration: Two Opposed Threaded Openings

Selection Specifications

Product Kind	Flow Cell
Cell Type	Flow Cell
Measurement Mode	Fluorescence Spectroscopy
Path Length	4 mm / 10 mm (dual path)
Light Transmission Configuration	Four-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	1.4 mL
External Dimensions	12.5 × 12.5 × 73 mm
Body Height	40 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Screw Cap
Closure Material	PTFE
Port Count	2
Port Thread	M12
Fabrication Method	Molded 83
Opening Configuration	Two Opposed Threaded Openings

Choose this option

Choose C044TS when the optical layout and the connection format both matter. This model pairs two specified path lengths with four-side optical access in a compact 12.5 × 12.5 mm body, while the opposed M12 threaded openings support installation into a defined flow route instead of open filling from the top.

What makes this option different

Dual optical paths provide both 4 mm and 10 mm specified path lengths in one cell.
Four-Way Light geometry keeps all four side faces available for compatible optical arrangements.
Two opposed M12 threaded openings suit a closed flow-cell installation with end connections.
Compact body with longer end-to-end envelope uses a 12.5 × 12.5 mm cross-section and 40 mm body height within a 73 mm overall bare length.

Using this cell

Install the cell as part of a liquid path that matches the two opposed M12 threaded openings. Fill gradually and check the illuminated region for trapped bubbles before measurement. The 1.4 mL figure is the nominal cell volume, not a stated minimum working volume for a particular setup.

For repeatable optical work, establish your blank after the cell and connected line are filled and stable. If your method uses fluorescence or another multi-face optical arrangement, align the cell so the active beam path matches your instrument geometry.

First-use check

Inspect the optical faces for scratches, residue or shipping debris.
Check that your connection hardware matches the M12 threaded openings.
Fill slowly with a suitable blank or process liquid and confirm that the optical region is free of bubbles.
Verify instrument clearance for the 73 mm end-to-end length after connection.

Fit and optical alignment

The body cross-section is 12.5 × 12.5 mm, with a 40 mm body height. The full bare end-to-end length is 73 mm, so holder clearance should be checked for the complete installed assembly rather than from the body section alone.

Z Height is not specified for this item. If your instrument or holder requires a defined beam-center height, check that requirement before ordering rather than assuming compatibility from the external shape.

The order is priced per single cell. Supplied closure details are not established here, so if you need included threaded parts or a specific connection arrangement, please check before ordering.

Solvents and cleaning

Molded 83 quartz construction is commonly selected for methods involving organic solvents or temperature-controlled work. PTFE is identified as the closure material for this configuration, but the supplied closure detail and the chemical limits of the complete assembled item are not established here.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Clean the optical faces gently with non-abrasive optical tissue and use a cleaning liquid that is suitable for the complete assembly you install.

Included with this option

1 cuvette per listed price unit. If you need a supplied closure or other accessory, contact us before ordering.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for changes involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch together with your holder or instrument details, critical dimensions, wavelength range, sample conditions and target quantity. Prototype batches typically involve 2–4 cells; feasibility, final specifications, price and production time are confirmed in the project quotation. Discuss your requirements.

Design notes for this configuration: 4 / 10 mm Dual-Path Quartz Flow Cell with Opposed Connections