(C552CS) Quartz Large-Window Cuvette, 50 mm Path, 42.4 mL
Original price was: $109.00.$99.00Current price is: $99.00.
C552CS is a JGS1 quartz large-window cuvette with a 50 mm optical path, Two-Way Light layout and 42.4 mL nominal capacity for UV/Vis work. Its open-top chamber and broad internal space suit direct filling, pouring and rinsing when your method uses a longer path and a larger sample volume. Sold as 1 cuvette per price unit.
Description
C552CS is a JGS1 quartz large-window cuvette for UV/Vis spectroscopy with a 50 mm optical path and 42.4 mL nominal capacity. This option combines a long transmission path with an open-top chamber and a broad sample space, so it is easier to fill, empty and rinse in methods that use a relatively large liquid volume.
It uses a Two-Way Light layout and an uncapped body sized 54 × 24 × 55 mm, with internal dimensions of 50 × 20 × 53 mm. That makes it a practical choice when you are selecting around path length and chamber size together, not just around a standard narrow cuvette footprint.
- Path Length
- 50 mm
- Sample Volume (Nominal)
- 42.4 mL
- Opening Configuration
- Open Top (Cell Body)
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Large-Window Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 50 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 42.4 mL |
| External Dimensions | 54 × 24 × 55 mm |
| Uncapped Cell Dimensions | 54 × 24 × 55 mm |
| Overall Height without Closure | 55 mm |
| External Dimensions Scope | Uncapped Cell |
| Body Height | 55 mm |
| Internal Dimensions | 50 × 20 × 53 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Fabrication Method | Standard 80 |
| Opening Configuration | Open Top (Cell Body) |
Choose this option
Choose C552CS when your method calls for a 50 mm path in an open large-window quartz cell and you want straightforward top access during filling and cleaning. The larger chamber is useful in manual workflows where you need room for pipetting, pouring or rinsing, while the long path supports setups specified around this cell length.
What makes this option different
- 50 mm optical path for methods built around a longer transmission path.
- 42.4 mL nominal capacity with a broad 50 × 20 × 53 mm internal chamber.
- Open-top body for direct liquid access during filling, emptying and rinsing.
- Standard 80 adhesive-bonded quartz construction, typically chosen for routine room-temperature water-based samples and buffers.
Using this cell
Fill from the top so the liquid level fully covers the beam region used by your instrument. For blank and sample measurements, keep the same orientation and keep bubbles, droplets and fingerprints away from the optical faces.
The open chamber is convenient for manual handling and visual checking. Because no supplied closure is established for this sale unit, use it as an open sample cell unless your own setup provides a suitable separate closure or fixture.
First-use check
Before first use, inspect the chamber and optical faces, then rinse with a liquid suitable for your method. Run a blank at your working wavelength and confirm that the filled sample level covers the beam path without trapped bubbles.
Fit and optical alignment
The listed outer size applies to the uncapped cell body: 54 × 24 × 55 mm. Check holder width, depth and vertical clearance before ordering, especially if your instrument accepts only a narrower cuvette format.
Z Height is not listed for this option. If your instrument has a fixed beam height, confirm beam position with your holder or fixture rather than relying on the outer body dimensions alone.
Solvents and cleaning
Standard 80 adhesive-bonded quartz is generally selected for routine water-based samples and buffers at room temperature. Avoid organic sample solvents and organic cleaning agents with this construction. If your method involves organic solvents, ask about a more suitable Sintered or Molded option.
Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Wipe the optical faces gently with a non-abrasive optical wipe.
Included with this option
1 cuvette per listed price unit. If you need a supplied closure or other accessory, contact us before ordering.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows, Z Height, closures, connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch together with your holder or instrument details, the critical dimensions, sample conditions and target quantity. Prototype batches typically involve 2–4 cells; feasibility, final specifications, price and production time are confirmed in the project quotation. Discuss your requirements.
Additional information
| Weight | 100 g |
|---|
You must be logged in to post a review.






Reviews
There are no reviews yet.