(C304CR3) Quartz High-Capacity Cuvette, 30 mm Path, 27 mL

Weight	100 g

SKU: C304CR3

Original price was: $190.00.Current price is: $171.00.

In Stock

C304CR3 is a JGS1 quartz high-capacity cuvette for fluorescence spectroscopy with a 30 mm optical path, 27 mL nominal capacity and Four-Way Light geometry. Its open-top square chamber gives direct filling and side optical access on all four sides. Sold as 1 cuvette per price unit.

In Stock

SKU: C304CR3 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C304CR3 is a JGS1 quartz high-capacity cuvette built for fluorescence spectroscopy with a 30 mm optical path and a 27 mL nominal volume. The open-top square chamber gives direct access for filling and rinsing, while the Four-Way Light layout keeps all four side faces available to the optical setup.

Path Length: 30 mm
Sample Volume (Nominal): 27 mL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	High-Capacity Cuvette
Measurement Mode	Fluorescence Spectroscopy
Path Length	30 mm
Light Transmission Configuration	Four-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	27 mL
External Dimensions	34 × 34 × 32 mm
Cell Body Dimensions	34 × 34 × 32 mm
External Dimensions Scope	Body Only
Internal Dimensions	30 × 30 × 30 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Included	No
Opening Configuration	Open Top

Choose this option

Choose C304CR3 when you need a 30 mm path length in a compact high-capacity square cell and do not need a supplied lid. Its 30 × 30 × 30 mm internal chamber gives more room than smaller cuvette formats, while the open top makes manual loading, rinsing and visual checking straightforward.

What makes this option different

30 mm optical path for methods specified around this path length.
Four-Way Light configuration with optical access on all four sides of the sample region.
27 mL nominal capacity in a 30 × 30 × 30 mm internal square chamber.
Supplied without a lid for users who want an open-top format only.

Using this cell

Fill the cell from the open top and make sure the liquid level covers the beam path used in your instrument. Remove bubbles before measurement, and keep the same orientation for blank and sample when your method uses a fixed optical arrangement.

Because this version is supplied without a lid, allow for open access above the cell during use and cleaning. Handle the cuvette by the non-optical outer surfaces and keep the light path faces free from fingerprints, droplets and dried residue.

First-use check

Inspect the optical faces for chips, scratches, residue or packing dust before first use. Rinse with a cleaning liquid suitable for your method, test the empty cell in the holder, and then confirm with a blank that the filled sample covers the beam area used by your setup.

Fit and optical alignment

The body dimensions are 34 × 34 × 32 mm, measured on the body only. These dimensions help with holder and compartment planning, especially where footprint and height are limited.

Four-Way Light means the optical setup uses the side faces of the cell. Z Height is not listed for this model, so if your instrument has a fixed beam height or a tight holder geometry, check beam-center fit before ordering rather than relying on the outside dimensions alone.

Solvents and cleaning

This quartz cuvette is specified for fluorescence spectroscopy over 200–2500 nm. For general fabrication background, see Compare fabrication options.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue or another suitable laboratory wipe. Detailed chemical compatibility limits are not established for this exact option, so check suitability first if your sample or cleaning routine is chemically demanding.

Included with this option

1 cuvette per listed price unit. Supplied without a lid.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

For a different design, send a drawing or describe the change you need. Custom JGS1 quartz enquiries are assessed separately from this listed specification; feasibility, quantity, price and timing are confirmed in the project quotation.