(C304CR2) Quartz High-Capacity Cuvette, 30 mm Path, 40.5 mL

Weight	100 g

SKU: C304CR2

Original price was: $246.00.Current price is: $222.00.

In Stock

C304CR2 is a JGS1 quartz high-capacity cuvette with a 30 mm optical path, Four-Way Light access and a 40.5 mL nominal capacity for fluorescence spectroscopy. Its 30 × 30 × 45 mm open-top chamber is supplied with a separate lid, so you can fill directly from above and then cover the cell for routine handling. Sold per 1 cuvette with lid.

In Stock

SKU: C304CR2 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C304CR2 is a JGS1 quartz high-capacity cuvette for fluorescence spectroscopy with a 30 mm optical path and 40.5 mL nominal capacity. Its square open-top chamber gives direct access for filling, while the Four-Way Light layout provides side optical access around the sample region. This version is supplied with a separate lid, which is useful when you want an open chamber during loading but prefer a matching cover afterward.

Path Length: 30 mm
Sample Volume (Nominal): 40.5 mL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	High-Capacity Cuvette
Measurement Mode	Fluorescence Spectroscopy
Path Length	30 mm
Light Transmission Configuration	Four-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	40.5 mL
External Dimensions	34 × 34 × 47 mm
Cell Body Dimensions	34 × 34 × 47 mm
External Dimensions Scope	Body Only
Internal Dimensions	30 × 30 × 45 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Included	Yes
Opening Configuration	Open Top

Choose this option

Choose C304CR2 when you need a larger square fluorescence cell built around a 30 mm path and top access to the sample chamber. The 30 × 30 × 45 mm internal space suits larger fills than a small cuvette format, and the included lid helps you keep the matching cover with the cell for day-to-day handling.

What makes this option different

30 mm optical path in a high-capacity square quartz cuvette.
40.5 mL nominal capacity with a 30 × 30 × 45 mm internal chamber.
Four-Way Light configuration for optical access on four sides of the cell body.
Open-top chamber supplied with a separate lid.

Using this cell

Fill the cell from the top and make sure the liquid level covers the beam region used in your method. For fluorescence work, keep the cell orientation consistent between blank and sample runs, and remove visible bubbles before measurement.

Place the lid after filling if your procedure benefits from covered handling between preparation and measurement. Handle both the cell body and lid by non-optical surfaces where possible, and keep the optical faces free from fingerprints and dried residue.

First-use check

Before first use, inspect the optical faces and the lid seating surfaces under good light. After filling, confirm that the sample covers the beam area used by your instrument and that the lid can be placed without interfering with the holder or measurement setup.

Fit and optical alignment

The body dimensions are 34 × 34 × 47 mm. These dimensions refer to the cuvette body only, not the overall clearance with the lid in place, so check both holder width and the space above the holder for filling and lid placement.

Z Height is not stated for this item. If your instrument requires a defined beam-center position, check the holder geometry against your beam height before ordering rather than relying on path length alone.

Solvents and cleaning

This cuvette is made from JGS1 quartz. General quartz-cell construction guidance is available here: MQ Cuvette Fabrication Glossary.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. For this SKU, a detailed chemical compatibility list is not established, so if your sample or cleaning routine involves more aggressive chemicals, please check suitability before ordering.

Included with this option

One quartz cuvette in the listed specification with lid included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for changes involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, and specific tolerances. Send a dimensioned drawing or labelled sketch together with your holder details, wavelength range, sample conditions and target quantity. Prototype batches typically involve 2–4 cells; feasibility, final specifications, price and production time are confirmed in the project quotation. Discuss your requirements and quote part number C304CR2.