(C304CE1) Quartz Fluorescence Cuvette, 30 mm Path, 10.5 mL, Pack of 2

Weight	100 g

SKU: C304CE1

Original price was: $569.00.Current price is: $513.00.

In Stock

C304CE1 is a quartz fluorescence cuvette with a 30 mm optical path, Four-Way Light geometry and an open-top sample chamber for direct filling. Its 10.5 mL nominal capacity suits methods that need a larger sample region and optical access from multiple sides. Sold as a pack of 2 cuvettes, with a closure included for each listed option.

In Stock

SKU: C304CE1 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C304CE1 is a quartz fluorescence cuvette for fluorescence spectroscopy with a 30 mm optical path, Four-Way Light geometry and an open-top body for direct sample access. Its 10.5 mL nominal capacity gives you a larger sample chamber than shorter or smaller fluorescence cells, while the listed MQ sale unit supplies two cuvettes for the price shown.

Path Length: 30 mm
Sample Volume (Nominal): 10.5 mL
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Cuvette
Cell Type	Fluorescence Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	Pack of 2
Path Length	30 mm
Light Transmission Configuration	Four-Way Light
Sample Volume (Nominal)	10.5 mL
External Dimensions	12.5 × 32.5 × 45 mm
Cell Body Dimensions	12.5 × 32.5 × 45 mm
External Dimensions Scope	Body Only
Body Height	45 mm
Base Dimensions	12.5 × 32.5 mm
Material	Quartz
Closure Included	Yes
Opening Configuration	Open Top (Cell Body)

Choose this option

Choose this cuvette when your method is built around a 30 mm path length and needs side optical access in addition to the main beam direction. The open-top body makes filling, rinsing and visual sample checks straightforward, which is useful for manual loading and routine fluorescence work. A closure is included, but this remains an open-top cell rather than a pressure-rated or flow-cell assembly.

What makes this option different

30 mm optical path for methods that require this longer transmission distance through the sample.
Four-Way Light geometry for optical access from multiple sides of the cuvette body in fluorescence setups.
Open-top sample chamber for direct filling, emptying and cleaning access from above.
10.5 mL nominal capacity for planning sample preparation and fill volume.
Pack of 2 cuvettes as the MQ priced sale unit for this SKU.

Using this cell

Fill the cell from the top and keep the optical faces in the measurement area clean, clear and free from droplets, bubbles or dried residue. For repeatable fluorescence measurements, keep the cuvette orientation consistent between blank, standard and sample runs so the same faces are presented to the instrument each time.

If you use the included closure during handling, treat it as part of an open-top cuvette setup rather than as evidence of sealed, leak-tight or pressure use. Any procedure that involves transporting filled cells, inversion, pressure or extended closed exposure should be checked against your own fixture and method conditions.

First-use check

Before first use, inspect the optical faces and sample chamber for transit residue, dust or handling marks. Test the empty fit in your holder first, then run your normal blank to confirm that the beam passes through the intended sample region without clipping the body or any closure above the opening.

Fit and optical alignment

The stated body dimensions are 12.5 × 32.5 × 45 mm, and these dimensions apply to the body only. Use them to check holder clearance, seating and surrounding space in your instrument or cuvette fixture.

Z Height is not stated for this option, so do not assume beam-center position from the overall body height alone. If your instrument uses a fixed beam height or a tightly defined fluorescence collection geometry, check that requirement before ordering.

Solvents and cleaning

Quartz is used here for fluorescence spectroscopy. For fabrication background, see Compare fabrication options.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning methods. The chemical limits of this exact assembly are not established here, so if your sample or cleaning routine involves aggressive solvents, elevated temperature or long contact time, check suitability before use.

Included with this option

Supplied as 2 cuvettes per MQ sale. A closure is included with this option.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom quartz cuvette requirements involving dimensions, optical path length, sample volume, optical access, Z Height, closures and related details. Send a dimensioned drawing or labelled sketch, your holder or instrument information, sample conditions and required quantity through our contact page, and include part number C304CE1.