(C012TS4) Quartz Screw-Top Cuvette, 1 mm Path, 350 µL

Weight	30 g
Dimensions	1.25 × 0.35 × 5.5 mm

SKU: C012TS4

Original price was: $209.00.Current price is: $189.00.

In Stock

Quartz screw-top cuvette for UV/Vis spectroscopy with a 1 mm optical path, Two-Way Light layout and 350 µL nominal capacity. Its slim 3.5 × 12.5 mm base and 55 mm uncapped height are useful when you need a narrow short-path cell and need to check holder width and top clearance. Sold as 1 cuvette.

In Stock

SKU: C012TS4 Categories: Cuvettes, Products, Quartz Screw-Top Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C012TS4 is a quartz screw-top cuvette for UV/Vis spectroscopy with a 1 mm optical path and 350 µL nominal capacity. It combines a short transmission path with a slim 3.5 × 12.5 mm base, which is useful when your method needs a compact cell body rather than a wider standard footprint. The screw-top format also gives you a threaded opening instead of an open-top chamber.

This listing is sold as 1 cuvette. The closure type is screw cap, but closure inclusion is not established for this option, so order on the basis of the cuvette itself unless you have confirmed the accessory requirement separately.

Path Length: 1 mm
Sample Volume (Nominal): 350 µL
Closure Type: Screw Cap

Selection Specifications

Product Kind	Cuvette
Cell Type	Screw-Top Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	1 mm
Light Transmission Configuration	Two-Way Light
Sample Volume (Nominal)	350 µL
Cell Body Dimensions	3.5 × 12.5 × 35 mm
Overall Height without Closure	55 mm
Body Height	35 mm
Base Dimensions	3.5 × 12.5 mm
Material	Quartz
Closure Type	Screw Cap
Fabrication Method	Molded 83

Choose this option

Choose C012TS4 when you need a 1 mm UV/Vis cell in a narrow screw-top format. The key selection points are the short path length, the 350 µL nominal volume, and the slim base profile. Together, these details help when you are matching a short-path method and checking whether a narrow-bodied cuvette will fit your holder and sample-handling routine.

What makes this option different

1 mm optical path for UV/Vis methods set up around a short transmission length.
Two-Way Light layout for transmission through two opposing optical faces.
350 µL nominal capacity in a compact screw-top cell body.
3.5 × 12.5 mm base and 55 mm uncapped height for checking holder width and top clearance separately.

Using this cell

Fill the cell so the liquid covers the illuminated sample region used by your instrument, then keep the same orientation for blank and sample if your method depends on a fixed measurement direction. Remove visible bubbles and wipe away exterior droplets before measurement.

Handle the cuvette by non-optical surfaces where possible. On a short-path cell, fingerprints, dried residue and scratches on the optical faces can interfere with routine use, so gentle handling matters.

First-use check

Inspect the optical faces and sample chamber for dust or handling marks.
Test the cuvette in your holder before running samples.
Fill with a suitable blank and confirm that the beam passes through a fully covered sample region.

Fit and optical alignment

The optical body is 35 mm high, with a 3.5 × 12.5 mm base footprint. The overall uncapped height is 55 mm to the top of the neck. That gives you useful fit information for holder slot width, seating depth and vertical clearance above the cuvette position.

Z Height is not stated for this SKU, so do not assume beam-center alignment from the outer shape alone. If your holder or instrument depends on a defined beam height, check that point before ordering.

Solvents and cleaning

Molded 83 is the fabrication type used for this cuvette. This construction is commonly chosen for methods that may involve organic solvents or heated conditions, but suitability still depends on the complete assembly and your actual sample and cleaning conditions.

Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning materials, and wipe the optical faces with non-abrasive optical tissue. If your method involves aggressive chemicals, elevated temperature or long contact time, check the full cell-and-closure conditions before use.

Included with this option

1 quartz screw-top cuvette. The listed price is for one piece.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz versions for changes to path length, body dimensions, nominal volume, optical windows, Z Height or closure style. Send a labelled sketch or drawing together with holder details, sample conditions and required quantity.