(C102SS19) Quartz Micro Cuvette, 10 mm Path, 1.75 mL

Weight	30 g

SKU: C102SS19

Original price was: $72.00.Current price is: $65.00.

In Stock

C102SS19 is a JGS1 quartz micro cuvette for UV/Vis spectroscopy with a 10 mm optical path, 1.75 mL nominal capacity and Two-Way Light transmission layout. Its 5 mm sample-region width offers the broadest filled measurement zone in this group while keeping the same compact square micro-cuvette body. Supplied as 1 cuvette per price unit, with a stopper included.

In Stock

SKU: C102SS19 Categories: Cuvettes, Products, Quartz Micro Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102SS19 is a quartz micro cuvette for UV/Vis work when you need a 10 mm optical path and the largest nominal capacity within this compact square micro-cell format. This JGS1 version combines a 1.75 mL nominal capacity, a 5 mm sample region and a stopper-equipped top, making it a practical choice for straight-through measurements that benefit from a broader filled region in a small cuvette body.

Path Length: 10 mm
Sample Volume (Nominal): 1.75 mL
Closure Type: Stopper

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Optical Window Dimensions	5 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	1.75 mL
External Dimensions	12.5 × 12.5 × 45 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Stopper
Closure Included	Yes
Fabrication Method	Standard 80
Detection Channel Width	5 mm

Choose this option

Choose C102SS19 when your method needs a 10 mm transmission path and you want a broader sample region than the narrower-channel options in the same family. The 1.75 mL nominal capacity and 5 mm sample-region width help when beam footprint and fill coverage are easier to manage in a wider filled zone, while the compact square base still suits micro-cuvette holder formats.

What makes this option different

10 mm optical path for standard UV/Vis transmission measurements.
1.75 mL nominal capacity in a compact micro cuvette format.
5 mm stated sample-region width for a broader filled measurement zone.
Two-Way Light layout with a stopper included for covered sample handling.

Using this cell

Fill the cell so the illuminated region remains fully covered during measurement, and keep bubbles, droplets and residue off the optical faces. Use a consistent orientation for blank and sample runs to keep the light path and beam position repeatable.

The 1.75 mL figure is the nominal cell capacity, not a minimum working volume. If you plan to work below nominal fill, check in your own setup that the beam still passes fully through the liquid column.

First-use check

Inspect the optical faces for dust, chips or residue.
Rinse with a suitable liquid for your method before first use.
Confirm that the cuvette seats stably in the holder.
Run a blank and verify that the beam passes through a fully filled, bubble-free sample region.

Fit and optical alignment

The stated external dimensions are 12.5 × 12.5 × 45 mm, with a 12.5 × 12.5 mm base. This helps you check holder fit and top clearance in your cuvette compartment.

Z Height is not stated for this exact option, so fixed-beam instruments should be checked for beam-center alignment before ordering. This is a Two-Way Light cell for straight optical transmission, and the stated 5 mm window/sample-region width should be matched against your beam footprint rather than treated as a certified clear aperture.

Solvents and cleaning

This cuvette uses Standard 80 adhesive-bonded quartz construction. It is generally suited to routine room-temperature water-based samples and buffers.

Avoid organic samples and organic cleaning solvents with this adhesive-bonded cell. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue or similar laboratory materials.

Included with this option

One cuvette is supplied per sale pack. A stopper is included with this cell.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz projects for changes to dimensions, optical path length, sample volume, optical windows, Z Height, closures and fabrication requirements. Send a dimensioned drawing or labelled sketch together with your instrument or holder details, sample conditions and quantity requirements. Discuss your requirements and quote part number C102SS19.