(C102SS27) Quartz Micro Cuvette, 10 mm Path, 1.4 mL
10%
Original price was: $72.00.$65.00Current price is: $65.00.
C102SS27 is a JGS1 quartz micro cuvette for UV/Vis work with a 10 mm optical path, 1.4 mL nominal capacity and a covered top opening. Its 4 mm sample-region width offers a middle option between narrower and wider variants in the same format. Sold as 1 cuvette per price unit, with closure included.
In Stock
Description
C102SS27 is a JGS1 quartz micro cuvette for UV/Vis measurements that keep the common 10 mm optical path in a compact body. This option combines a 1.4 mL nominal capacity, Two-Way Light layout and a supplied closure, with a 4 mm sample-region width that can suit methods needing more beam room than a 3 mm version without moving to the widest opening in the series.
It is a straightforward choice when you want a covered sample cell for routine top filling and a micro cuvette footprint that still leaves room to think carefully about beam placement. The 12.5 × 12.5 mm base keeps holder checks simple, while the 4 mm sample region remains an important alignment detail.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 1.4 mL
- Closure Type
- Stopper
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Micro Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Pack Quantity | 1 Piece |
| Path Length | 10 mm |
| Light Transmission Configuration | Two-Way Light |
| Optical Window Dimensions | 4 mm |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 1.4 mL |
| External Dimensions | 12.5 × 12.5 × 45 mm |
| Base Dimensions | 12.5 × 12.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Closure Type | Stopper |
| Closure Included | Yes |
| Fabrication Method | Standard 80 |
| Detection Channel Width | 4 mm |
Choose this option
Choose C102SS27 when your method uses a 10 mm path length and you want a compact UV/Vis micro cuvette with moderate nominal capacity and a covered opening. The 4 mm sample-region width makes this version useful when a 3 mm illuminated region feels tight but you still want controlled beam placement in a small-format cell.
What makes this option different
- 10 mm optical path for standard straight-through UV/Vis measurements.
- 1.4 mL nominal capacity in a micro cuvette body rather than a larger standard cell.
- 4 mm sample-region width for beam-footprint planning in the illuminated area.
- Closure included for covered sample handling during preparation and measurement.
- JGS1 quartz with Standard 80 adhesive-bonded construction.
Using this cell
Fill the cuvette from the top and confirm that the beam passes through a fully covered, bubble-free liquid region. For consistent results, keep the same orientation and seating when you run blanks and samples.
The stated 1.4 mL is a nominal capacity, not a minimum working volume. If your method uses a shallow fill or a fixed beam position, check that the actual liquid level covers the beam path in your setup.
First-use check
- Inspect the optical faces for chips, residue or handling marks.
- Test the cuvette in the holder and confirm stable seating.
- Fill with blank solution first and verify full beam coverage through the liquid region.
- Make sure the closure area has enough clearance in your holder or instrument compartment.
Fit and optical alignment
The external dimensions are listed as 12.5 × 12.5 × 45 mm, with a 12.5 × 12.5 mm base. This is useful for checking holder seating in the common square format, but the stated height is not defined here as body-only or closure-included, so top clearance should be checked if your holder area is tight.
Z Height is not specified for this option. The 4 mm sample-region width helps with beam planning, but it does not replace a beam-center check in instruments with fixed optical geometry.
Solvents and cleaning
This cuvette uses Standard 80 adhesive-bonded quartz construction. It is commonly selected for routine room-temperature work with water-based samples and buffers.
Avoid organic sample solvents and organic cleaning agents with this construction. Do not use hydrofluoric acid on quartz, and avoid hot strong alkalis and abrasive cleaning. Clean the optical faces gently with suitable non-abrasive laboratory or optical tissue.
Included with this option
1 cuvette per listed price unit. Closure included.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We can review a custom JGS1 quartz version if you need a different path length, sample capacity, outer geometry, window arrangement or beam-height fit. Send your drawing or labelled sketch, instrument or holder details, critical dimensions and sample conditions through our contact page, and quote part number C102SS27.
Additional information
| Weight | 30 g |
|---|
You must be logged in to post a review.
You may also like…
9%
(C102CS11) Glass Micro Cuvette, 10 mm Path, 1.75 mL
Original price was: $34.00.$31.00Current price is: $31.00.6%
(C102CS10) Glass Micro Cuvette, 10 mm Path, 1.75 mL
Original price was: $18.00.$17.00Current price is: $17.00.Related products
11%
(MQC376) Quartz Capillary Tubes (Square), Outer Dim.: 1x1mm, Inner Dim.: 0.2×0.2mm, Length: 25mm
Original price was: $19.00.$17.00Current price is: $17.00.14%
(MQC382) Quartz Capillary Tubes (Square), Outer Dim.: 1x1mm, Inner Dim.: 0.2×0.2mm, Length: 100mm
Original price was: $38.00.$33.00Current price is: $33.00.14%
(MQC372) Quartz Capillary Tubes (Square), Outer Dim.: 1.4×1.4mm, Inner Dim.: 1.1×1.1mm, Length: 100mm
Original price was: $38.00.$33.00Current price is: $33.00.15%
Reviews
There are no reviews yet.