(C012CS9) Quartz Large-Window Cuvette, 1 mm Path, 1.7 mL

Weight	30 g

SKU: C012CS9

Original price was: $285.00.Current price is: $257.00.

In Stock

C012CS9 is a JGS1 quartz Large-Window Cuvette with a 1 mm optical path, 1.7 mL nominal capacity and an open-top body. Its body-only 3.5 × 32.5 × 60 mm format combines a thin sample path with a broad rectangular optical face. The listed price is for 1 cuvette.

In Stock

SKU: C012CS9 Categories: Cuvettes, Products, Quartz Large Window Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C012CS9 is a JGS1 quartz Large-Window Cuvette with a 1 mm optical path and 1.7 mL nominal capacity. The open-top body, broad rectangular face and thin optical thickness make it useful when your method needs a short path in a larger-format cell rather than a standard square cuvette. Quartz use is specified over 200–2500 nm for this model, and the listed price is for 1 cuvette.

Path Length: 1 mm
Sample Volume (Nominal): 1.7 mL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Large-Window Cuvette
Measurement Mode	UV/Vis Spectroscopy
Path Length	1 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	1.7 mL
External Dimensions	3.5 × 32.5 × 60 mm
Cell Body Dimensions	3.5 × 32.5 × 60 mm
External Dimensions Scope	Body Only
Body Height	32.5 mm
Material	Quartz
Material Grade	JGS1
Opening Configuration	Open Top

Choose this option

Choose C012CS9 when you need a 1 mm path in a larger rectangular body with direct top access to the sample region. The body-only geometry of 3.5 × 32.5 × 60 mm gives you a thin optical thickness together with a taller and longer window area, which is useful when planning holder clearance, filling access and beam placement.

What makes this option different

1 mm optical path for methods that need a short transmission distance.
1.7 mL nominal capacity in a broad rectangular large-window body.
Open-top configuration for direct filling and visual inspection from above.
JGS1 quartz specified over 200–2500 nm for this model.
Body-only dimensions of 3.5 × 32.5 × 60 mm for holder and clearance checks.

Using this cell

Fill from the open top and make sure the liquid fully covers the illuminated region during measurement. Keep the same orientation for blank and sample runs, and avoid bubbles or droplets on the optical faces.

The 1.7 mL figure is the nominal capacity of the cell, not a minimum working volume. If your method depends on a very specific fill height or beam coverage in a fixed setup, check those points against your instrument before ordering.

First-use check

Inspect the rim and optical faces for chips, residue or handling marks.
Place the cell in the holder and confirm that the body seats securely without forcing.
Run a blank measurement to confirm beam coverage and stable positioning.

Fit and optical alignment

Check the body-only dimensions against your holder before ordering. This model is specified as 3.5 × 32.5 × 60 mm for the body, with 32.5 mm identified as the body height in the source drawing.

Z Height is not stated for this SKU, so do not treat the body height as beam-center height. If your instrument or holder has a fixed beam position, confirm the actual alignment requirement before purchase.

Solvents and cleaning

For fabrication background, see the MQ fabrication guide. This SKU is a quartz cell, but specific chemical limits for this exact item are not established here, so cleaning and sample conditions should be chosen carefully if your method involves aggressive chemicals.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning methods. Wipe the optical faces gently with non-abrasive optical tissue and a suitable laboratory cleaning liquid for your procedure.

Included with this option

1 cuvette per listed price unit. If you need a supplied closure or other accessory, contact us before ordering.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application.

Prototype batches typically involve 2–4 cells; final feasibility, quantity, specifications, price and production time are confirmed in the project quotation. Modified designs are quoted separately from the listed SKU. Contact us here and mention C012CS9.