(C102CS25) Quartz Micro Cuvette, 10 mm Path, 700 µL, Pack of 2

Weight	30 g

SKU: C102CS25

Original price was: $151.00.Current price is: $136.00.

In Stock

C102CS25 is a JGS3 quartz micro cuvette for infrared spectroscopy and visible absorbance methods that use a 10 mm path length in a compact cell body. This version combines a Two-Way Light layout, a 2 mm sample-region width and 700 µL nominal capacity. Supplied as a pack of 2 cuvettes with PTFE lids.

In Stock

SKU: C102CS25 Categories: Cuvettes, Products, Quartz Micro Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102CS25 is a JGS3 quartz micro cuvette for infrared spectroscopy and visible absorbance measurements that use a standard 10 mm optical path in a compact rectangular body. This option combines a 2 mm sample-region width with 700 µL nominal capacity, making it a practical choice when you want this geometry in a two-cuvette purchase. This sale option is supplied as 2 cuvettes with PTFE lids.

Path Length: 10 mm
Sample Volume (Nominal): 700 µL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	Infrared Spectroscopy; Visible Absorbance Spectroscopy
Pack Quantity	Pack of 2
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Optical Window Dimensions	2 mm
Wavelength Range — Lower Limit	260 nm
Wavelength Range — Upper Limit	3500 nm
Sample Volume (Nominal)	700 µL
External Dimensions	12.5 × 12.5 × 45 mm
Cell Body Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Material Grade	JGS3
Closure Type	Lid
Closure Material	PTFE
Closure Included	Yes
Fabrication Method	Standard 80
Detection Channel Width	2 mm

Choose this option

Choose C102CS25 when your method needs a 10 mm path length, a Two-Way Light layout and a moderate micro-volume sample region, and you want two cuvettes in the same price unit. The 2 mm sample region is the main structural feature to match against your beam footprint and filling practice, while the compact body keeps the same external format used for holder fit checks.

What makes this option different

10 mm optical path in a micro cuvette format.
2 mm sample-region width paired with 700 µL nominal capacity.
Two-Way Light layout for the stated IR and visible absorbance applications.
Sold as a pack of 2 cuvettes, with PTFE lids included.

Using this cell

Fill each cuvette so the illuminated sample region is fully covered and free from bubbles or droplets during measurement. For blank and sample work, keep the same seating orientation so handling does not introduce avoidable variation.

The 700 µL figure is a nominal capacity, not a minimum working volume. If you intend to fill below nominal capacity, check that the liquid still covers the active beam region in your holder.

First-use check

Inspect both cuvettes for clean optical faces, chips and residue, then test-fit one cell in the holder with a blank or solvent. Confirm stable seating, practical top clearance and full beam coverage at your chosen fill level before starting routine measurements.

Fit and optical alignment

The uncapped cell body measures 12.5 × 12.5 × 45 mm. Use those dimensions to check holder seating and surrounding clearance for the body, but allow additional top space for the lid because the capped envelope is not established here.

Z Height is not specified for this model. If your instrument uses a fixed beam position, confirm that the beam passes through the intended sample region before routine use.

Solvents and cleaning

This cuvette uses Standard 80 fabrication with an adhesive-bonded quartz body. It is suited to routine water-based samples and buffers at room temperature. Avoid organic sample solvents and organic cleaning agents with this construction, and check the full wetted assembly, including the PTFE lid, against your method conditions.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Rinse promptly after use and clean the exterior optical faces gently with non-abrasive optical tissue.

Included with this option

Supplied as 2 quartz micro cuvettes with PTFE lids.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for changes involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication details. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that matter to your method. Discuss your requirements and quote part number C102CS25.