(C102CD5) Quartz Ultra-Micro Cuvette, 10 mm Path, 200 µL

Weight	30 g

SKU: C102CD5

Original price was: $133.00.Current price is: $120.00.

In Stock

C102CD5 is a JGS1 quartz ultra-micro cuvette for UV/Vis work, combining a 10 mm optical path with 200 µL nominal capacity and a 15 mm Z Height. Its stopper-equipped format keeps the top covered during routine handling while maintaining a compact body for holder planning. Sold as 1 cuvette, with closure included.

In Stock

SKU: C102CD5 Categories: Cuvettes, Products, Quartz Micro Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102CD5 is a JGS1 quartz Ultra-Micro Cuvette for UV/Vis spectroscopy with a 10 mm optical path, 200 µL nominal capacity and a 15 mm Z Height. It suits methods that keep a standard 10 mm path but work with a small liquid charge rather than a larger cuvette fill. The included closure also makes it useful when you want the sample covered at the top during normal handling.

Path Length: 10 mm
Sample Volume (Nominal): 200 µL
Closure Type: Stopper

Selection Specifications

Product Kind	Cuvette
Cell Type	Ultra-Micro Cuvette
Measurement Mode	UV/Vis Spectroscopy
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Z Height	15 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	200 µL
External Dimensions	12.5 × 12.5 × 45 mm
Cell Body Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Body Only
Body Height	45 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Stopper
Closure Included	Yes
Fabrication Method	Standard 80

Choose this option

Choose C102CD5 when your UV/Vis method needs a 10 mm path and your sample size fits a 200 µL nominal ultra-micro format. The 15 mm Z Height is a key fit point for instruments and holders that reference beam position from the cell base, and the stopper-equipped top is helpful for routine covered handling of small liquid volumes.

What makes this option different

10 mm optical path for methods built around this standard absorbance path length.
200 µL nominal capacity in an ultra-micro cell format for small-volume UV/Vis measurements.
15 mm Z Height for bottom-referenced beam alignment in compatible holders.
Two-Way Light configuration for the defined transmission path used in routine UV/Vis work.
Closure included for a stopper-equipped top during routine handling.
Standard 80 adhesive-bonded construction for room-temperature water-based samples and buffers.

Using this cell

Fill the cell so the beam passes fully through liquid rather than through an exposed upper region. The 200 µL value is the nominal capacity, not a minimum working volume, so your practical fill level should be based on full beam coverage and stable handling in your own method.

Insert the supplied closure carefully and keep the contact surfaces clean. The covered top is useful during routine bench use, but it does not establish a pressure rating or guarantee performance for inversion, transport or other sealing-dependent conditions.

First-use check

Inspect the optical faces and top opening for dust or residue.
Place the empty cell in the holder to confirm stable seating and top clearance.
Fill with blank solution and verify that the beam region is fully covered without bubbles.
Insert the closure gently and confirm that your normal handling does not shift the sample condition.

Fit and optical alignment

The body dimensions are 12.5 × 12.5 × 45 mm for the bare cell body. That height refers to the body only, not the full installed height with the closure projecting above it, so check top clearance if your holder area is tight.

The optical centre is 15 mm above the base. Match that reference to your instrument geometry, especially if your holder has a fixed beam position or limited vertical adjustment.

Solvents and cleaning

This cell uses Standard 80 adhesive-bonded quartz construction. It is generally suited to room-temperature water-based samples and buffers. Avoid organic samples and organic cleaning solvents with this assembled cell.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Clean with a suitable non-abrasive laboratory method, and wipe the outside optical faces gently with optical tissue.

Included with this option

One C102CD5 ultra-micro cuvette with closure included. The selected sales listing determines the sale unit; if you need a confirmed delivered quantity for purchasing or method setup, please check before ordering.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication details. Send a dimensioned drawing or labelled sketch together with your instrument or holder information, sample conditions and target quantity. Discuss your requirements and quote part number C102CD5.