(C102CS35) Glass Micro Cuvette, 10 mm Path, 350 µL, Pack of 2

Weight	30 g

SKU: C102CS35

Original price was: $34.00.Current price is: $31.00.

In Stock

C102CS35 is a glass micro cuvette for visible absorbance spectroscopy with a 10 mm optical path, 350 µL nominal capacity and a 1 mm sample region. Its Two-Way Light layout suits straightforward transmission measurements in a compact cell format. Sold as a pack of 2 cuvettes, with PTFE lids included.

In Stock

SKU: C102CS35 Categories: Cuvettes, Glass Cuvettes, Products Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102CS35 is a glass micro cuvette for visible absorbance work when you need a 10 mm path in a compact 350 µL format. The Two-Way Light layout and narrow 1 mm sample region suit methods that use a small illuminated section. This option is sold as a pack of 2 cuvettes, with PTFE lids included.

This is a visible-light cell rather than a UV cell, so it should be selected only for methods that stay in the visible range. It uses adhesive-bonded Standard 80 construction, which also limits chemical use and cleaning choices.

Path Length: 10 mm
Sample Volume (Nominal): 350 µL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	Visible Absorbance Spectroscopy
Pack Quantity	Pack of 2
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Optical Window Dimensions	1 mm
Sample Volume (Nominal)	350 µL
Material	Glass
Closure Type	Lid
Closure Material	PTFE
Closure Included	Yes
Fabrication Method	Standard 80
Detection Channel Width	1 mm

Choose this option

Choose C102CS35 when you want this visible-range micro cuvette specification in a two-piece purchase. The 10 mm path keeps a familiar absorbance geometry, while the 350 µL nominal capacity and 1 mm sample region suit compact filling and a narrow illuminated section. A two-cuvette sale unit can be practical for blank-and-sample use, repeat work or keeping one matching cell available as a spare.

What makes this option different

Glass body for visible absorbance spectroscopy only.
10 mm optical path with 350 µL nominal capacity.
Two-Way Light configuration with a 1 mm sample region.
Supplied as 2 cuvettes per price unit, with PTFE lids included.

Using this cell

Fill each cell so the illuminated region is fully covered during measurement, and keep bubbles or droplets away from the optical faces. The 350 µL value is a nominal capacity, not a minimum working volume, so your own method should determine the fill needed for reliable beam coverage.

If you use both cuvettes in the same workflow, keep their orientation and seating consistent between blank, sample and repeated runs. Seat each PTFE lid gently after filling, but do not use the lid as a pressure-rated closure.

First-use check

Inspect both cuvettes for dust, residue or visible marks on the optical faces.
Test fit each empty cuvette in your holder before preparing sample.
Run a visible-range blank and confirm that the filled sample covers the beam without bubbles.

Fit and optical alignment

The key geometry provided here is the 1 mm sample region. Your beam should pass through that intended area without clipping the edges, so the holder and beam footprint should be checked together if your setup is tight.

External body dimensions are not established for this item, and Z Height is also not established. If your instrument compartment has limited clearance or a fixed beam-center position, confirm physical fit and beam alignment before ordering rather than assuming interchangeability with other micro cuvettes.

Solvents and cleaning

This adhesive-bonded Standard 80 cuvette has a restricted chemical range. Do not soak or rinse it with ethanol, and do not use acids, alkalis or organic solvents with this construction.

Use cleaning methods suitable for mild, water-based residue and wipe the optical faces gently with non-abrasive tissue. Avoid abrasive cleaning on both the cell body and the PTFE lid.

Included with this option

Pack of 2 micro cuvettes, with PTFE lids included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Need a different fit?

We coordinate custom JGS1 quartz projects for requirements involving dimensions, optical path length, sample volume, optical windows, Z Height, closures and fabrication details. These custom quartz projects are separate from the listed glass SKU. Send a dimensioned drawing or labelled sketch, your holder or instrument information, the key dimensions and tolerances, and your sample conditions. Discuss your requirements and reference C102CS35.