(C104TR5) Quartz Screw-Top Cuvette, 10 mm Path, 3.5 mL, Pack of 2

Weight	30 g
Dimensions	1.25 × 1.25 × 4.5 mm

SKU: C104TR5

Original price was: $379.00.Current price is: $342.00.

In Stock

C104TR5 is a JGS1 quartz screw-top cuvette for UV/Vis work with a 10 mm optical path, Four-Way Light geometry and 3.5 mL nominal capacity. The internal M10 screw closure with PTFE cap gives you a covered cell format, and the four optical faces add side access where your setup uses it. Supplied as a pack of 2 cuvettes, with PTFE closures included.

In Stock

SKU: C104TR5 Categories: Cuvettes, Products, Quartz Screw-Top Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104TR5 is a JGS1 quartz screw-top cuvette for UV/Vis spectroscopy with a 10 mm optical path and 3.5 mL nominal capacity. Its Four-Way Light layout gives optical access on four sides, while the internal M10 screw closure and PTFE cap provide a covered sample cell format. Supplied as a pack of 2, this option suits labs that want the same capped cell geometry for paired routine use.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Closure Type: Screw Cap

Selection Specifications

Product Kind	Cuvette
Cell Type	Screw-Top Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	Pack of 2
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Sample Volume (Nominal)	3.5 mL
Cell Body Dimensions	12.5 × 12.5 × 45 mm
Overall Height without Closure	45 mm
Body Height	45 mm
Overall Height with Closure	55 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Screw Cap
Closure Material	PTFE
Closure Included	Yes
Closure Thread	M10

Choose this option

Choose C104TR5 when your method uses a 10 mm path but you also want side optical access rather than a simple two-face transmission layout. The 3.5 mL nominal capacity suits routine liquid loading, and the included PTFE screw closures help when you prefer to fill, cap and move the cells in a covered format between preparation and measurement.

What makes this option different

Four-Way Light geometry adds optical access on four sides instead of only the main opposing faces.
Internal M10 screw closure uses an included PTFE cap for a threaded covered-top format.
3.5 mL nominal capacity fits routine liquid sample loading in a full-size square cuvette body.
Pack of 2 cuvettes suits workflows that keep matching cell format on hand for parallel use, blank/sample handling or a spare.

Using this cell

Fill each cell so the liquid fully covers the beam path used by your instrument, then fit the PTFE closure before handling or measurement as required by your method. Keep the optical faces clean, and avoid bubbles or droplets in the light path.

When you use both cuvettes in the same method, keep their orientation and fill condition consistent. The stated 3.5 mL value is a nominal capacity for each cuvette, not a minimum working volume.

First-use check

Inspect both cuvettes before first use, especially the optical faces and threaded opening. Rinse with a solvent suitable for your method, check that the PTFE caps thread in smoothly, and run a blank under the same fill level and orientation you plan to use for samples.

Fit and optical alignment

Each cuvette has a 12.5 × 12.5 mm base, a 45 mm uncapped body height and a 55 mm overall height with the cap fitted. These are the practical dimensions to check for holder slot size and vertical clearance above the cell in capped use.

Z Height is not stated for this item. If your spectrometer, holder or accessory depends on a known bottom-to-beam position, confirm that requirement directly rather than relying on the outer body dimensions alone.

Solvents and cleaning

Quartz is widely used for UV/Vis work, but the chemical limits of this exact assembled screw-top cell are not established here. If your method involves aggressive chemicals, extended contact time or cleaning steps that may affect the body or closure, check suitability for the exact conditions you plan to use.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue. For general background on cuvette construction, see Compare fabrication methods.

Included with this option

Price is for a pack of 2 quartz screw-top cuvettes. PTFE closures are included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application. Prototype batches typically involve 2–4 cells; the final quantity, feasibility, specifications, price and production time are confirmed in the project quotation. Modified designs and prototype batches are quoted separately from the listed SKU. Discuss your requirements