(C102WS16) Quartz Flow Cell, 10 mm Path, 3.5 mL

Weight	30 g

SKU: C102WS16

Original price was: $403.00.Current price is: $363.00.

In Stock

C102WS16 is a JGS1 quartz flow cell with a 10 mm optical path, a Two-Way Light layout and a 3.5 mL nominal capacity. Its 10 × 10 × 33 mm internal chamber and opposed quartz tube connections suit UV/Vis flow setups that need a defined straight-through sample region. This listing is for the selected C102WS16 flow cell specification.

In Stock

SKU: C102WS16 Categories: Cuvettes, Products, Quartz Flow Cells Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102WS16 is a JGS1 quartz flow cell for UV/Vis work with a 10 mm optical path and 3.5 mL nominal capacity. It combines a Two-Way Light transmission layout with a larger 10 × 10 × 33 mm internal chamber and two opposed quartz tube connections, making it a practical choice when your method needs a defined straight-through liquid path and more chamber volume than a compact micro-flow design.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Opening Configuration: Two Opposed Fluid Tubes

Selection Specifications

Product Kind	Flow Cell
Cell Type	Flow Cell
Measurement Mode	UV/Vis Spectroscopy
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	3.5 mL
External Dimensions	45 × 12.5 × 12.5 mm
Cell Body Dimensions	45 × 12.5 × 12.5 mm
External Dimensions Scope	Body Only
Body Height	45 mm
Base Dimensions	12.5 × 12.5 mm
Internal Dimensions	10 × 10 × 33 mm
Material	Quartz
Material Grade	JGS1
Port Count	2
Tube Outer Diameter (OD)	4 mm
Tube Inner Diameter (ID)	2 mm
Fabrication Method	Molded 83
Opening Configuration	Two Opposed Fluid Tubes

Choose this option

Choose C102WS16 when your setup is built around a 10 mm transmission path and an end-to-end flow layout. The larger internal chamber is useful when you need a clearly defined sample region inside the cell, while the opposed tube arrangement helps you plan direct fluid routing through the optical body. It is also a good fit when you want JGS1 quartz with a Molded 83 construction for UV/Vis flow methods.

What makes this option different

10 mm optical path for transmission measurements in a standard-length flow geometry.
Two-Way Light layout with optical access across the main sample chamber for UV/Vis use.
10 × 10 × 33 mm internal chamber paired with a 3.5 mL nominal capacity for a larger straight-through sample region.
Two opposed quartz tubes with 4 mm OD and 2 mm ID for connection planning at both ends of the cell.

Using this cell

Support the cell body during installation so the projecting quartz tubes are not taking the weight of the connected tubing. Fill the flow path gradually on first setup and watch the optical region for trapped bubbles before you run a blank or sample.

In use, treat the stated 3.5 mL as the nominal volume of the cell itself. It does not include liquid held in external tubing, connectors or any other parts of the circuit. No pressure rating is stated here, so pressurized use should be reviewed with your full flow-path conditions in mind.

First-use check

Inspect the optical faces, internal chamber and both tube ends before installation.
Confirm that the cell is fully supported and that the beam passes through the intended optical direction.
After filling with a suitable blank, recheck for bubbles in the chamber and droplets on the outer optical faces.

Fit and optical alignment

The stated 45 × 12.5 × 12.5 mm dimensions apply to the optical body only. They do not include the projecting tube ends, so leave additional clearance at both ends for connection space and tubing bend radius.

Z Height is not stated for this item. If your holder or instrument depends on a defined beam centre height, check that point against your fixture rather than relying on body dimensions alone.

Solvents and cleaning

Molded 83 quartz is commonly selected for methods that may involve organic solvents and temperature-controlled work. Choose the sample and cleaning routine for the complete wetted assembly, not only for the quartz body, especially when contact time or reagent strength matters.

Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning materials, and clean the optical faces gently with non-abrasive optical tissue or another suitable non-scratching laboratory wipe.

Included with this option

The listed price is for one C102WS16 flow cell.

Additional accessory contents should be confirmed for your order.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch together with holder or instrument details, sample chemistry, contact time and target quantity.

Prototype batches typically involve 2–4 cells, with feasibility, final specifications, price and production time confirmed in the project quotation. Discuss your requirements and quote part number C102WS16.