(C25.42CS1) Quartz Colorimetric Cuvette, 25.4 mm Path, 15 mL

Weight	100 g

SKU: C25.42CS1

Original price was: $71.00.Current price is: $64.00.

In Stock

C25.42CS1 is a quartz colorimetric cuvette with a 25.4 mm optical path, an open-top body and 15 mL nominal capacity. The open chamber supports direct filling and rinsing, while the rectangular body format suits setups that use this longer path length. Supplied as 1 cuvette.

In Stock

SKU: C25.42CS1 Categories: Cuvettes, Products, Quartz High-Capacity Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C25.42CS1 is a quartz colorimetric cuvette for methods built around a 25.4 mm optical path. Its open-top body and 15 mL nominal capacity make it practical for direct filling, emptying and rinsing when you are working with prepared sample volumes rather than micro-volume handling. This option is sold as one cuvette.

Path Length: 25.4 mm
Sample Volume (Nominal): 15 mL
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Cuvette
Cell Type	Colorimetric Cuvette
Measurement Mode	Colorimetry
Pack Quantity	1 Piece
Path Length	25.4 mm
Light Transmission Configuration	Two-Way Light
Sample Volume (Nominal)	15 mL
External Dimensions	29.4 × 20 × 40 mm
Cell Body Dimensions	29.4 × 20 × 40 mm
External Dimensions Scope	Body Only
Body Height	40 mm
Base Dimensions	29.4 × 20 mm
Material	Quartz
Opening Configuration	Open Top (Cell Body)

Choose this option

Choose this cuvette when your method needs a 25.4 mm path and you want a simple open chamber without ports or attached fittings. The quartz body gives you this material option in a straightforward rectangular format, and the listed 15 mL nominal capacity suits applications where the sample volume is already established around a larger fill.

What makes this option different

25.4 mm optical path for colour measurement methods that use this path length.
Open-top body for direct pouring, pipetting, emptying and repeat rinsing.
15 mL nominal capacity for larger prepared sample fills.
29.4 × 20 × 40 mm body size to check holder footprint and vertical clearance before ordering.

Using this cell

Fill the cell from the top so the sample fully covers the beam during measurement. If your method uses a blank and sample sequence, keep the same cell orientation for both runs and remove visible bubbles before taking a reading.

Because the chamber is open, load and pour carefully to keep liquid off the outside optical faces. Handle the cuvette by the non-optical surfaces where possible, and check that the clear faces are dry before placing it in the instrument.

First-use check

Inspect the rim, corners and optical faces on arrival, then test the empty cuvette in the holder before routine use. After that, run a blank or method-appropriate liquid to confirm that the filled sample region sits correctly in the beam path.

Fit and optical alignment

The nominal body dimensions are 29.4 × 20 × 40 mm, and these dimensions apply to the body only. Use them to check holder width, depth and insertion clearance, especially if your instrument accepts only a specific rectangular cuvette format.

Z Height is not listed for this SKU, so outer body size alone does not establish beam-height compatibility. The stated 15 mL is nominal capacity, not a minimum working volume, so choose it by your method geometry rather than by capacity alone.

Solvents and cleaning

This cuvette uses quartz, but the chemical limits for this exact SKU are not specified here. Match the cleaning method to the actual sample and laboratory procedure instead of assuming a universal solvent range.

For general fabrication background across cuvette types, see Compare fabrication options. Wipe the outer optical faces gently with non-abrasive optical tissue and avoid abrasive cleaning that could mark the clear surfaces.

Included with this option

Supplied as 1 cuvette.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different path length, body size, capacity, opening style or other fit-related change, we can review a custom version. Send a drawing or labelled sketch, your holder or instrument details, the critical dimensions and your sample conditions. Discuss your requirements and quote part number C25.42CS1.