(C27.52CR) Quartz Large-Window Cuvette, 27.5 mm Path, 21.8 mL

Weight	100 g

SKU: C27.52CR

Original price was: $114.00.Current price is: $103.00.

In Stock

C27.52CR is a JGS1 quartz large-window cuvette for UV/Vis work with a 27.5 mm optical path, Two-Way Light layout and 21.8 mL nominal capacity. Its open-top body gives direct access to a broad sample chamber for filling, rinsing and inspection. Sold as 1 cuvette per price unit.

In Stock

SKU: C27.52CR Categories: Cuvettes, Products, Quartz High-Capacity Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C27.52CR is a JGS1 quartz large-window cuvette for UV/Vis spectroscopy with a 27.5 mm optical path, Two-Way Light geometry and 21.8 mL nominal capacity. The open-top chamber is easy to fill and rinse by hand, and the larger internal space is useful when your method needs a longer path together with a broader sample region rather than a narrow standard-format cell. This version uses powder-fused quartz construction.

Path Length: 27.5 mm
Sample Volume (Nominal): 21.8 mL
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Cuvette
Cell Type	Large-Window Cuvette
Measurement Mode	UV/Vis Spectroscopy
Path Length	27.5 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	21.8 mL
External Dimensions	34.5 × 31.5 × 34.5 mm
Uncapped Cell Dimensions	34.5 × 31.5 × 34.5 mm
Overall Height without Closure	34.5 mm
External Dimensions Scope	Uncapped Cell
Body Height	34.5 mm
Internal Dimensions	30.5 × 27.5 × 32.5 mm
Material	Quartz
Material Grade	JGS1
Opening Configuration	Open Top (Cell Body)

Choose this option

Choose C27.52CR when your setup is built around a 27.5 mm transmission path and you want direct top access to the sample chamber. The 30.5 × 27.5 × 32.5 mm internal dimensions and 21.8 mL nominal capacity make it suitable for larger manual fills, while the uncapped 34.5 × 31.5 × 34.5 mm body remains easier to place than much taller oversized cells.

What makes this option different

27.5 mm optical path for UV/Vis methods specified around this transmission distance.
21.8 mL nominal capacity with a broad 30.5 × 27.5 × 32.5 mm internal chamber.
Open-top large-window body for direct filling, rinsing and visual checking of the sample region.
Powder-fused quartz construction rather than an adhesive-bonded open cell.

Using this cell

Fill the chamber from the top and make sure the liquid level covers the active beam path during measurement. After filling, inspect the optical region for bubbles or residue on the transmission faces before taking a reading.

For routine use, keep blank and sample in the same orientation and handle the body by non-optical areas where possible. Because this is an open cell, plan your transfer and measurement steps so the cuvette stays upright throughout filling and use.

First-use check

Inspect the chamber and optical faces for chips, residue or handling marks before first use. Rinse with a suitable liquid for your method, test the empty cell in the holder to confirm seating and beam access, and run a blank before routine measurements.

Fit and optical alignment

The listed outer dimensions, 34.5 × 31.5 × 34.5 mm, describe the uncapped cell body. Check holder width, depth and top clearance before ordering, especially if your instrument well is shaped for a narrower or lower-volume cuvette.

Z Height is not specified for this item. If your holder or spectrometer depends on a fixed beam-center height, confirm that requirement separately before purchase.

Solvents and cleaning

This SKU is a powder-fused quartz large-window cuvette. The exact chemical limits for this specific option are not stated here, so if your method uses aggressive solvents or demanding cleaning steps, check full suitability for the complete assembly before ordering. For general construction background, see MQ Cuvette Fabrication Glossary.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue.

Included with this option

1 cuvette per listed price unit. If you need a supplied closure or other accessory, contact us before ordering.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different body size, path length, capacity, Z Height or closure style, we can review a custom JGS1 quartz version separately from this listed SKU. Send your drawing or holder details, critical dimensions, sample conditions and target quantity through the contact page, and refer to part number C27.52CR.