(C302CR8) Quartz Rectangular Sample Cell, 30 mm Path

Weight	100 g

SKU: C302CR8

Original price was: $136.00.Current price is: $123.00.

In Stock

C302CR8 is a JGS1 quartz rectangular sample cell for UV/Vis spectroscopy with a 30 mm optical path and Two-Way Light transmission through opposite faces. Its 30 × 30 × 33 mm internal chamber provides a broad square sample region in a 34 × 34 × 35 mm body-only format, and a closure is included. Sold as 1 cell.

In Stock

SKU: C302CR8 Categories: Cuvettes, Products, Quartz High-Capacity Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C302CR8 is a JGS1 quartz rectangular sample cell for UV/Vis spectroscopy with a 30 mm optical path and a broad square chamber. The Two-Way Light layout keeps the optical path straightforward across opposite faces, while the included closure lets you work with a covered opening during handling and measurement. This option suits setups that need a wider sample region than a narrow cuvette body, without moving to a much larger external footprint.

Path Length: 30 mm
Cell Type: Rectangular Sample Cell
Closure Type: Flat Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Rectangular Sample Cell
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	30 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
External Dimensions	34 × 34 × 35 mm
Cell Body Dimensions	34 × 34 × 35 mm
External Dimensions Scope	Body Only
Body Height	35 mm
Internal Dimensions	30 × 30 × 33 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Flat Lid
Closure Included	Yes
Wall Thickness	2 mm

Choose this option

Choose C302CR8 when your method calls for a 30 mm transmission path and you want a rectangular chamber with generous width and depth for filling, viewing and handling. The 30 × 30 × 33 mm internal space gives you a large sample region, while the 34 × 34 × 35 mm body-only size helps you judge whether the cell will sit comfortably in your holder or compartment. A closure is included, which is useful when you want the top opening covered during normal use.

What makes this option different

30 mm optical path for methods specified at this transmission length.
Two-Way Light layout with light passing through two opposing optical faces for direct transmission measurements.
Broad 30 × 30 × 33 mm internal chamber that gives a wide square sample region rather than a narrow internal section.
Compact 34 × 34 × 35 mm body-only size relative to the chamber dimensions, useful when bench space or holder space is limited.
Closure included so the sample opening can be covered during handling and routine measurement.
2 mm wall thickness is specified for this cell.
Fused integrated construction is the supplier’s stated construction term for this SKU.

Using this cell

Fill the chamber so the liquid fully covers the illuminated region across the 30 mm path, then remove visible bubbles before measurement. The square opening and broad internal chamber make filling and visual inspection straightforward, especially when you need to check the sample surface or side walls before placing the cell in the instrument.

Use the same orientation for blank and sample measurements, and handle the cell by non-optical surfaces where possible. A closure is included, but its exact type, material and sealing performance are not specified here, so do not rely on it as a defined pressure, leak-tight or storage seal without checking that point first.

First-use check

Inspect the optical faces and chamber opening for chips, residue or handling marks.
Test fit the body in your holder and check top clearance with the closure in place.
Rinse with a suitable blank or compatible liquid before first measurement.
After filling, confirm that the beam path is fully covered by clear, bubble-free sample.

Fit and optical alignment

The listed 34 × 34 × 35 mm dimensions apply to the cell body only. If your holder, clamp or compartment has limited vertical clearance, allow extra space above the body for the included closure.

Z Height is not established for this SKU, so beam-center fit should be checked against your instrument or fixture rather than inferred from the 35 mm body height. Capacity is also not settled here, so selection is best based on the stated path length and chamber dimensions rather than a single volume figure.

Solvents and cleaning

This quartz cell is intended for UV/Vis use over the stated 200–2500 nm range, but the chemical limits of the assembled cell are not established here. If your sample or cleaning liquid is aggressive, heated or used for extended contact, check suitability before routine use.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and clean the optical faces gently with non-abrasive optical tissue. For general fabrication background and selection guidance, see MQ Cuvette Fabrication Glossary.

Included with this option

Supplied as 1 rectangular sample cell. A closure is included. No further package contents are established here.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, chamber geometry, closures, windows, Z Height and related tolerances. Send a dimensioned drawing or labelled sketch together with holder details, beam-height requirements, sample conditions and target quantity. Discuss your requirements and quote part number C302CR8.