(C202CE3) Quartz Large-Window Cuvette, 10 mm Path, 7 mL

Weight	100 g

SKU: C202CE3

Original price was: $104.00.Current price is: $94.00.

In Stock

C202CE3 is a JGS1 quartz large-window cuvette for UV/Vis spectroscopy with a 10 mm optical path, 7 mL nominal capacity and an included lid. It offers the familiar 10 mm path in a large-window body for routine manual filling and broader optical-face access than a narrow cell format. Sold as 1 cuvette per price unit.

In Stock

SKU: C202CE3 Categories: Cuvettes, Products, Quartz Large Window Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C202CE3 is a JGS1 quartz large-window cuvette for UV/Vis spectroscopy with a 10 mm optical path, 7 mL nominal capacity and an included lid. It suits methods that use a standard 10 mm path but prefer a larger-window quartz body for sample handling and beam access. The body dimensions of 22.5 × 12.5 × 45 mm provide a practical reference when checking holder space, while keeping in mind that these dimensions apply to the body only.

Path Length: 10 mm
Sample Volume (Nominal): 7 mL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Large-Window Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	7 mL
External Dimensions	22.5 × 12.5 × 45 mm
Cell Body Dimensions	22.5 × 12.5 × 45 mm
External Dimensions Scope	Body Only
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Included	Yes

Choose this option

Choose C202CE3 when you want the familiar 10 mm UV/Vis path length in a larger-window cuvette body with a 7 mL nominal chamber. This option is useful for routine bench measurement where you fill manually, want a supplied lid, and need a compact large-window cell rather than a longer-path version.

What makes this option different

10 mm optical path: intended for standard UV/Vis absorbance methods.
Large-window body: provides a broader optical-face format than a narrow routine cuvette.
7 mL nominal capacity: supports methods that need a larger fill than micro or semi-micro cells.
Lid included: supplied as 1 cuvette per price unit with lid.

Using this cell

Fill the cell so the liquid fully covers the beam path, then remove bubbles from the optical area before measurement. Keep the same orientation for blank and sample runs, and handle the cuvette by the non-optical surfaces to help keep the windows clean.

This is a lidded sample cell for routine upright use. No pressure rating or sealed operating limit is stated for this SKU, so it should not be selected as a pressure-handling or closed-circuit component.

First-use check

Inspect the optical faces and lid on arrival, test fit the cuvette in your holder, and rinse it with a suitable liquid for your method before first use. Then fill the cell, confirm that the liquid level covers the beam path, and run a blank before routine measurement.

Fit and optical alignment

The stated body dimensions are 22.5 × 12.5 × 45 mm, and these measurements apply to the body only. Check your holder for seating, side clearance and top clearance for the lid before ordering.

Z Height is not listed here. If your instrument depends on a fixed beam center height, confirm that requirement separately. The 10 mm path length is established, but final alignment still depends on your holder geometry.

Solvents and cleaning

The supplier describes this cell as fused integrated construction. For general background on cuvette construction and cleaning approach, see Cuvette Fabrication Glossary.

Specific chemical limits for this exact SKU are not listed here. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe optical faces gently with non-abrasive optical tissue.

Included with this option

1 cuvette per listed price unit. Closure included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz projects for changes such as dimensions, optical path length, sample volume, optical windows, Z Height, closures, connections and tolerance requirements. Send a dimensioned drawing or labelled sketch together with your holder details, method wavelength range, sample conditions and target quantity. Prototype batches typically involve 2–4 cells; feasibility, final specifications, price and production time are confirmed in the project quotation. Discuss your requirements and reference C202CE3.