(C104SE10) Quartz Micro Cuvette, 10 mm Path, 1.75 mL
10%
Original price was: $293.00.$264.00Current price is: $264.00.
C104SE10 is a quartz micro cuvette with a 10 mm optical path, Four-Way Light access and a stopper, intended for fluorescence spectroscopy and methods using volatile solutions. Its 1.75 mL nominal capacity, 5 mm window dimension and 5 mm sample-channel width help you review beam coverage and filling around the sample region. Sold as 1 cuvette per price unit.
In Stock
Description
C104SE10 is a quartz micro cuvette for fluorescence spectroscopy with a 10 mm optical path, Four-Way Light access and a stoppered top. The 1.75 mL nominal capacity gives you a larger micro-format body volume than smaller slit variants, while the 5 mm window dimension and 5 mm sample-channel width are the key geometry points to check when planning beam coverage and sample handling. Quartz is specified here for 200–2500 nm use.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 1.75 mL
- Closure Type
- Stopper
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Micro Cuvette |
| Measurement Mode | Fluorescence Spectroscopy |
| Path Length | 10 mm |
| Light Transmission Configuration | Four-Way Light |
| Optical Window Dimensions | 5 mm |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 1.75 mL |
| Material | Quartz |
| Closure Type | Stopper |
| Closure Included | Yes |
| Detection Channel Width | 5 mm |
Choose this option
Choose C104SE10 when your method uses a 10 mm path but you also need optical access from multiple sides and a covered top during filling and measurement. This layout suits fluorescence-related setups that use side optical access around the sample region, and it gives you a 1.75 mL nominal volume option for routine loading without moving to a larger general-purpose cell format.
What makes this option different
- 10 mm optical path for methods built around this path length.
- Four-Way Light layout provides optical access on four sides around the sample region for supported fluorescence geometry.
- Stoppered top gives covered access after filling, which is useful for work involving volatile solutions.
- 1.75 mL nominal capacity identifies the body volume option for this SKU; it is not a minimum working fill.
- 5 mm window dimension is useful when checking whether your beam footprint stays within the intended optical area.
- 5 mm sample-channel width helps you review filling, bubble control and beam placement in the sample region.
- Fused integrated construction is the supplier’s stated build style for this exact cuvette and should be considered together with your cleaning routine and sample chemistry.
Using this cell
Fill the cuvette so the illuminated region is fully covered during measurement, then insert the stopper after loading the sample. Keep the same orientation and stopper seating for blank and sample runs, especially if your method is sensitive to beam position across the sample region.
The 5 mm sample-channel width is worth checking during filling because bubbles or droplets can intrude into a relatively compact optical region. Keep the exterior optical faces clean and dry before placing the cell in the holder.
First-use check
Inspect the optical faces for chips, residue or transit marks before first use. Rinse with a suitable cleaning liquid for your method, fill the cell, and run a blank in the same orientation you plan to use for samples. Confirm that the beam path is covered and free from trapped bubbles.
Fit and optical alignment
Review holder clearance and beam position before ordering. This listing does not establish a Z Height, so instrument fit should be checked against your actual holder and beam geometry rather than assumed from the 10 mm path length alone.
The stated 5 mm window dimension and 5 mm sample-channel width are the available geometry references for judging whether the beam footprint will stay within the intended sample region. If your compartment has tight clearance or a fixed beam center, send the holder drawing or instrument details for review.
Solvents and cleaning
Compare fabrication options if your method or cleaning routine involves demanding chemicals. For this exact listing, assembly-level chemical limits are not established here, so the sample liquid and cleaning approach should be checked against the complete cuvette construction before use.
Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the exterior optical faces gently with non-abrasive optical tissue.
Included with this option
1 cuvette per listed price unit. Stopper included.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application. Prototype batches typically involve 2–4 cells; the final quantity, feasibility, specifications, price and production time are confirmed in the project quotation. Discuss your requirements and quote part number C104SE10.
Additional information
| Weight | 30 g |
|---|
You must be logged in to post a review.
You may also like…
10%
(C104SE9) Quartz Micro Cuvette, 10 mm Path, 1.4 mL
Original price was: $293.00.$264.00Current price is: $264.00.Related products
11%
(MQC370) Quartz Capillary Tubes (Square), Outer Dim.: 1.4×1.4mm, Inner Dim.: 1.1×1.1mm, Length: 25mm
Original price was: $19.00.$17.00Current price is: $17.00.15%
(MQC365) Quartz Capillary Tubes (Square), Outer Dim.: 0.95×0.95mm, Inner Dim.: 0.35×0.35mm, Length: 50mm
Original price was: $28.00.$24.00Current price is: $24.00.11%
(MQC373) Quartz Capillary Tubes (Square), Outer Dim.: 1.8×1.8mm, Inner Dim.: 0.25×0.25mm, Length: 25mm
Original price was: $19.00.$17.00Current price is: $17.00.14%
Reviews
There are no reviews yet.