(C102CS49) Glass Micro Cuvette, 10 mm Path, 1.75 mL
6%
Original price was: $18.00.$17.00Current price is: $17.00.
C102CS49 is a glass micro cuvette for visible absorbance measurements, with a 10 mm optical path, Two-Way Light layout and 1.75 mL nominal capacity. Its 5 mm sample-region width makes it a wider-format option within this micro-cuvette style. Sold as 1 cuvette.
In Stock
Description
C102CS49 is a glass micro cuvette for visible absorbance measurements from 350 to 2000 nm. It combines a 10 mm optical path with a 5 mm sample-region width and 1.75 mL nominal capacity, giving you a visible-range micro format with a relatively wide sample region. This sale option is supplied as 1 cuvette.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 1.75 mL
- Closure Type
- Lid
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Micro Cuvette |
| Measurement Mode | Visible Absorbance Spectroscopy |
| Pack Quantity | 1 Piece |
| Path Length | 10 mm |
| Light Transmission Configuration | Two-Way Light |
| Optical Window Dimensions | 5 mm |
| Wavelength Range — Lower Limit | 350 nm |
| Wavelength Range — Upper Limit | 2000 nm |
| Sample Volume (Nominal) | 1.75 mL |
| External Dimensions | 12.5 × 12.5 × 45 mm |
| Uncapped Cell Dimensions | 12.5 × 12.5 × 45 mm |
| External Dimensions Scope | Uncapped Cell |
| Material | Glass |
| Closure Type | Lid |
| Closure Included | Yes |
| Fabrication Method | Standard 80 |
| Detection Channel Width | 5 mm |
Choose this option
Choose C102CS49 when you need a visible-range micro cuvette with a standard 10 mm path and a 5 mm sample-region width. That combination is useful when you want micro-cuvette handling but prefer a wider sample region than narrower slit formats in the same family, while keeping the stated 1.75 mL nominal capacity for planning your fill and routine measurements.
What makes this option different
- 10 mm optical path for methods that use the standard 1 cm absorbance path length.
- Two-Way Light configuration for transmission along the intended measurement path.
- 5 mm sample-region width as the stated slit width for this exact option.
- 1.75 mL nominal capacity for this micro-cuvette geometry.
- Visible-range glass cell for measurements from 350 to 2000 nm.
- Standard 80 construction based on adhesive-bonded assembly.
Using this cell
Fill the cell from the top and place it in the holder so the beam passes through the intended optical faces. Before reading, check that the illuminated sample region is fully covered and that bubbles are cleared from the light path.
Use the same orientation for blank and sample. The stated 1.75 mL figure is a nominal capacity for this geometry, not a minimum working volume, so your practical fill level should be established in your own instrument setup.
First-use check
- Inspect the optical faces and inner sample region before filling.
- Place the empty cell in the holder to confirm stable seating and orientation.
- Run a blank in the intended measurement position before testing samples.
Fit and optical alignment
The external dimensions are 12.5 × 12.5 × 45 mm for the uncapped cell body. These dimensions help you check holder fit and body clearance, but they do not include any extra top clearance that may be needed when the supplied closure is in place.
Z Height is not listed for this option. If your instrument has a fixed beam-center height or limited vertical adjustment, confirm alignment from the actual beam position rather than relying on outer size alone.
Solvents and cleaning
This adhesive-bonded glass cuvette is listed as Standard 80. That construction is a practical reason to review both your sample liquid and your cleaning liquid before use, especially if your method involves aggressive reagents, organic solvents, heated cleaning or long contact times.
The chemical limits of this exact option are not stated here. Keep hydrofluoric acid away from glass, avoid hot strong alkalis and abrasive cleaners, and clean the optical faces gently with non-abrasive optical tissue.
Included with this option
The listed price is for 1 cuvette. A closure is included. Other package contents should be checked before ordering if they are important to your setup.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication details. Send your drawing or holder information, critical dimensions, sample conditions and target quantity through the contact page, and include part number C102CS49.
Additional information
| Weight | 30 g |
|---|
You must be logged in to post a review.
You may also like…
9%
(C102CS48) Glass Micro Cuvette, 10 mm Path, 1.4 mL, Pack of 2
Original price was: $34.00.$31.00Current price is: $31.00.9%
(C102CS46) Glass Micro Cuvette, 10 mm Path, 1.05 mL, Pack of 2
Original price was: $34.00.$31.00Current price is: $31.00.9%
(C102CS44) Glass Micro Cuvette, 10 mm Path, 700 µL, Pack of 2
Original price was: $34.00.$31.00Current price is: $31.00.9%
(C102CS50) Glass Micro Cuvette, 10 mm Path, 1.75 mL, Pack of 2
Original price was: $34.00.$31.00Current price is: $31.00.Related products
11%
(MQC377) Quartz Capillary Tubes (Square), Outer Dim.: 1x1mm, Inner Dim.: 0.6×0.6mm, Length: 25mm
Original price was: $19.00.$17.00Current price is: $17.00.15%
(MQC365) Quartz Capillary Tubes (Square), Outer Dim.: 0.95×0.95mm, Inner Dim.: 0.35×0.35mm, Length: 50mm
Original price was: $28.00.$24.00Current price is: $24.00.14%
(MQC382) Quartz Capillary Tubes (Square), Outer Dim.: 1x1mm, Inner Dim.: 0.2×0.2mm, Length: 100mm
Original price was: $38.00.$33.00Current price is: $33.00.14%
Reviews
There are no reviews yet.