(C104CD7) Quartz Ultra-Micro Cuvette, 10 mm Path, 100 µL

Weight	30 g

SKU: C104CD7

Original price was: $190.00.Current price is: $171.00.

In Stock

C104CD7 is a JGS1 quartz ultra-micro cuvette for fluorescence spectroscopy with a 10 mm optical path, Four-Way Light access and 100 µL nominal capacity. Its open-top body allows direct pipette filling and visual checking during loading. Supplied as 1 cuvette per listed item.

In Stock

SKU: C104CD7 Categories: Cuvettes, Products, Quartz Micro Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104CD7 is a JGS1 quartz ultra-micro cuvette for fluorescence spectroscopy that combines a 10 mm optical path with a 100 µL nominal capacity in an open-top format. This layout is useful when you need direct access for careful pipetting while keeping optical access from multiple sides. Sold as 1 cuvette per listed item.

Path Length: 10 mm
Sample Volume (Nominal): 100 µL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Ultra-Micro Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Sample Volume (Nominal)	100 µL
Material	Quartz
Material Grade	JGS1
Opening Configuration	Open Top

Choose this option

Choose C104CD7 when your method needs a 10 mm path in a small-volume quartz cell and you prefer direct top loading rather than a closed or connected design. The 100 µL nominal capacity helps you plan sample handling in an ultra-micro format, while the Four-Way Light arrangement suits fluorescence setups that use side optical access as part of the measurement geometry.

What makes this option different

10 mm optical path in an ultra-micro cuvette format for methods built around this path length.
100 µL nominal capacity for small-volume sample handling without changing to a shorter path.
Four-Way Light configuration for optical access from multiple sides in supported fluorescence work.
Open-top body for direct filling, sample exchange and visual checks during loading.
JGS1 quartz construction for quartz-cell use in UV/fluorescence work where this material grade is specified.

Using this cell

Load the sample from the top with a pipette and make sure the illuminated sample region is fully covered before measurement. In this format, careful filling matters: avoid bubbles, droplets on the optical faces and dried residue near the light path.

Keep the same seating direction for blank and sample runs so the optical arrangement stays consistent. The 100 µL value is a nominal capacity, not a minimum working volume, so your actual fill must suit your holder and beam position.

First-use check

Inspect the optical faces for chips, dust or handling residue.
Rinse with a liquid suitable for your method before first use.
Place the cuvette in the holder and confirm stable seating.
Run a blank and confirm that the filled sample covers the measurement region without bubbles.

Fit and optical alignment

Check the holder, sample compartment and beam position before ordering, especially for fluorescence setups that depend on side optical access. This is an ultra-micro cell, but released customer-fit values for external dimensions and Z Height are not available here, so fit should be checked against your actual holder clearance and beam location rather than assumed from the family name alone.

If your instrument uses a fixed beam height or a compact holder, send the holder drawing or model together with the available clearance for review.

Solvents and cleaning

Quartz is used here as the cell material, but chemical limits for the complete selected assembly are not specified for this option. If your method involves demanding chemicals, heated cleaning or long contact times, check the exact sample and cleaning conditions before use.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Wipe exterior optical faces gently with non-abrasive optical tissue. For general fabrication background, see https://machinedquartz.com/fabrication-method-of-cuvettes/.

Included with this option

Supplied as 1 cuvette. No closure or additional accessories are specified for this option.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz versions for changes to dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication requirements. Send a dimensioned drawing or labelled sketch, plus your holder or instrument details, sample conditions and target quantity. Prototype batches typically involve 2–4 cells, with feasibility, final specifications, price and production time confirmed in the project quotation. https://machinedquartz.com/contact/ and quote part number C104CD7.