(C171WS1) Quartz Reflectance Sample Cell

Weight	30 g

SKU: C171WS1

Original price was: $48.00.Current price is: $44.00.

In Stock

C171WS1 is a JGS1 quartz reflectance sample cell made as a shallow open-top cylindrical cup for reflectance measurements. Its 15 mm internal cavity and 3 mm internal depth give direct top access to the sample surface in a compact 17 mm diameter, 5.5 mm high body. Supplied as 1 cell.

In Stock

SKU: C171WS1 Categories: Cuvettes, Products, Quartz Cylinder Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C171WS1 is a compact JGS1 quartz reflectance sample cell for reflectance measurements. Its open-top cylindrical cup gives direct access to a 15 mm sample cavity, while the 3 mm internal depth and 5.5 mm overall uncapped height suit methods that work with an exposed sample surface in a low-profile body. Supplied as 1 cell, this option is useful when you need a defined round sample area with simple top loading.

Cell Type: Reflectance Sample Cell
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Specialized Cell
Cell Type	Reflectance Sample Cell
Measurement Mode	Reflectance Measurements
Pack Quantity	1 Piece
Overall Height without Closure	5.5 mm
Body Height	5.5 mm
Outer Diameter (OD)	17 mm
Inner Diameter (ID)	15 mm
Material	Quartz
Material Grade	JGS1
Opening Configuration	Open Top (Cell Body)
Internal Height	3 mm

Choose this option

Choose C171WS1 when your reflectance setup uses a shallow round sample cup rather than a tall cell body or a closed assembly. The 15 mm internal diameter gives a clear circular sample area, and the open top lets you place, level and inspect the sample surface directly before measurement. Its compact 17 mm outer diameter can also help where the holder or accessory has limited surrounding clearance.

What makes this option different

Open-top cup structure for direct loading and surface preparation from above.
15 mm internal diameter with 3 mm internal depth for a shallow circular sample region.
Compact cylindrical body with 17 mm outer diameter and 5.5 mm uncapped height.
JGS1 quartz construction for reflectance measurement use.
Supplier-described powder-fused construction, indicating a fused quartz cup structure rather than a closure-based assembly.

Using this cell

Load the sample from the top and prepare the exposed surface according to your measurement method. The shallow cavity makes the sample region easy to see during filling and leveling, which helps you check surface coverage before the cell is placed in the instrument or accessory.

This is an open sample cup. It is suited to applications where the sample is presented directly at the top opening for measurement, not to applications that require a sealed cap, pressure handling or controlled flow connections.

First-use check

Inspect the cup for chips, scratches or residue before first use, and make sure it sits evenly in the intended holder. Then run your usual blank, background or reference procedure and verify that the illuminated area falls on the prepared sample surface.

Fit and optical alignment

Check the holder or reflectance accessory for a cylindrical body around 17 mm in diameter and 5.5 mm high. The internal cavity is round, 15 mm in diameter and 3 mm deep, so the support should hold the cup securely without obstructing access to the sample surface.

Z Height is not specified for this item. If your instrument depends on a defined beam-center height or a fixed seating reference, confirm that requirement separately before ordering.

Solvents and cleaning

Compare fabrication options if construction and cleaning approach are important to your method. This item is described with a supplier resistance claim covering acids, alkalis and organic liquids, but the exact chemical, concentration, temperature and exposure conditions are not specified, so chemical use and cleaning steps should be matched to your actual process.

The powder-fused construction term identifies the cup as a fused quartz structure for this selected option; it does not by itself define a full solvent list or a sealing system. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning methods, and clean gently to protect the sample-contact area.

Included with this option

1 reflectance sample cell.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for changes involving body size, sample cavity geometry, holder fit or other dimensional requirements related to this type of reflectance cell. Send a labelled drawing or sketch together with holder details, sample conditions and quantity, and we can review a suitable version for your application. Discuss your requirements and quote part number C171WS1.