(C171WS) Quartz Reflectance Sample Cell
9%
Original price was: $48.00.$44.00Current price is: $44.00.
C171WS is a JGS1 quartz reflectance sample cell with an open-top cylindrical cup for reflectance measurements. Its 17 mm outer diameter, 2.5 mm low-profile body and 1 mm wall thickness suit setups that need a very shallow sample cup with direct top access. Supplied as 1 cell.
In Stock
Description
C171WS is a JGS1 quartz reflectance sample cell made as a shallow open-top cylindrical cup for reflectance measurements. The 17 mm outer diameter and 2.5 mm body height make it useful when you need the sample surface close to the holder seat and easy to reach from above. This option is sold as 1 cell.
- Cell Type
- Reflectance Sample Cell
- Opening Configuration
- Open Top (Cell Body)
Selection Specifications
| Product Kind | Specialized Cell |
|---|---|
| Cell Type | Reflectance Sample Cell |
| Measurement Mode | Reflectance Measurements |
| Pack Quantity | 1 Piece |
| Overall Height without Closure | 2.5 mm |
| Body Height | 2.5 mm |
| Outer Diameter (OD) | 17 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Opening Configuration | Open Top (Cell Body) |
| Wall Thickness | 1 mm |
Choose this option
Choose C171WS when your method uses a shallow sample cup rather than a deeper body. The open top gives direct access for placing, spreading or inspecting the sample surface, while the low-profile form helps where vertical clearance around the sample position is limited. The quartz body is specified as JGS1 material with a powder-fused construction term for this SKU.
What makes this option different
- Open-top sample access: the sample region is directly accessible from above for loading and surface preparation.
- Low-profile body: the 2.5 mm body height suits holders or accessories where a taller cup would sit too high or crowd nearby parts.
- 17 mm cylindrical outside diameter: a practical fit point when checking the holder seat or recess size.
- 1 mm wall thickness: relevant when you need to judge how the cup sits in a close-fitting support.
- JGS1 quartz construction: appropriate for quartz sample-cell use where your method calls for this material.
- Powder-fused construction term: this SKU is identified by that construction description, which helps distinguish it from other fabrication types when matching a preferred build style.
Using this cell
Load the sample from the top and prepare the exposed surface according to your reflectance procedure. The shallow cup is suited to work where you need direct access for placing a powder or other sample at the measurement area without reaching into a tall cavity.
Because the sample area remains open, use the cell in an orientation that keeps the sample stable during handling and measurement. This page does not define a lid, stopper or pressure-rated closure for this SKU.
First-use check
Inspect the rim and body for chips, scratches or residual particles before first use. Test-fit the empty cell in the holder, confirm that it sits flat and stable, and then run your normal blank or reference procedure before measuring samples.
Fit and optical alignment
Check the holder or sample seat against the 17 mm outside diameter and the 2.5 mm body height. In this format, clearance above the rim and the way the cup sits in its recess can matter as much as the diameter itself.
Z Height is not established here, so this page does not claim a specific instrument fit. If your reflectance accessory has a fixed beam position or a shaped sample seat, verify the alignment in the actual holder before ordering.
Solvents and cleaning
This quartz cell is described for contact with acids, alkalis and organic liquids, but no concentration, temperature or exposure-time limits are defined here. Select sample-contact and cleaning conditions according to your actual chemicals and process rather than treating that statement as an unrestricted compatibility list.
Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. For general background on quartz cuvette constructions, see Compare fabrication methods.
Included with this option
Supplied as 1 reflectance sample cell. Additional accessories or closures are not established for this SKU.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
If you need a different diameter, height or related quartz sample-cell geometry for your reflectance setup, send your drawing or labelled sketch with holder details, critical dimensions and sample conditions through Discuss your requirements, and reference part number C171WS.
Additional information
| Weight | 30 g |
|---|
You must be logged in to post a review.
You may also like…
9%
10%
10%
(C161WS) Quartz Reflectance Sample Cell
Original price was: $129.00.$117.00Current price is: $117.00.10%
(C12.51WS) Quartz Reflectance Sample Cell
Original price was: $41.00.$37.00Current price is: $37.00.Related products
14%
(MQC384) Quartz Capillary Tubes (Square), Outer Dim.: 1x1mm, Inner Dim.: 0.3×0.3mm, Length: 100mm
Original price was: $38.00.$33.00Current price is: $33.00.15%
(MQC371) Quartz Capillary Tubes (Square), Outer Dim.: 1.4×1.4mm, Inner Dim.: 1.1×1.1mm, Length: 50mm
Original price was: $28.00.$24.00Current price is: $24.00.14%
(MQC382) Quartz Capillary Tubes (Square), Outer Dim.: 1x1mm, Inner Dim.: 0.2×0.2mm, Length: 100mm
Original price was: $38.00.$33.00Current price is: $33.00.14%
Reviews
There are no reviews yet.