(C161WS) Quartz Reflectance Sample Cell

Weight	30 g

SKU: C161WS

Original price was: $129.00.Current price is: $117.00.

In Stock

C161WS is a JGS1 quartz reflectance sample cell with a tall open-top cylindrical body for direct loading from above. This 16 mm OD, 100 mm-high option uses a powder-fused quartz construction and a 1 mm wall thickness for reflectance work that needs a long, narrow sample-cup form. Supplied as 1 cell.

In Stock

SKU: C161WS Categories: Cuvettes, Products, Quartz Cylinder Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C161WS is a JGS1 quartz reflectance sample cell with a tall open-top cylindrical body for direct sample access from above. Its 16 mm outer diameter, 100 mm body height and 1 mm wall thickness make it useful when your reflectance setup needs a long, narrow quartz sample cup rather than a short body. Supplied as 1 cell.

Cell Type: Reflectance Sample Cell
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Specialized Cell
Cell Type	Reflectance Sample Cell
Measurement Mode	Reflectance Measurements
Pack Quantity	1 Piece
Overall Height without Closure	100 mm
Body Height	100 mm
Outer Diameter (OD)	16 mm
Material	Quartz
Material Grade	JGS1
Opening Configuration	Open Top (Cell Body)
Wall Thickness	1 mm

Choose this option

Choose C161WS when your holder or accessory is designed around a 16 mm cylindrical body and you need extra vertical length below the opening. The open top lets you load, level and inspect the sample directly, while the powder-fused quartz construction gives you a fused quartz body without adding a separate closure or cover arrangement to the sample area.

What makes this option different

Open-top access: sample loading, surface preparation and cleaning are done directly from above.
100 mm body height: useful where the cell sits deep in a fixture or needs more body length for handling and positioning.
16 mm outer diameter: important for checking holder bores, sleeves and support fittings built around this cylindrical size.
1 mm wall thickness: worth checking where holder clearance is close around the cup body.
Powder-fused quartz construction: this supplier-described fused construction is part of the exact SKU and suits a simple open sample-cup format without a separate cap or plate assembly.
JGS1 quartz material: selected for a quartz reflectance cell rather than a metal or plastic sample cup.

Using this cell

Load the sample through the top opening and prepare the exposed sample surface according to your reflectance method. The open body is suited to applications where you need to place, level or inspect the sample before measurement rather than feed it through a closed connection.

Because the sample area remains open, handle the filled cell carefully so the presented surface is not disturbed before measurement. If your procedure depends on a closed space, controlled liquid movement or pressure, this page does not establish that kind of use for this cell.

First-use check

Inspect the rim and body for chips, scratches or residue before first use. Place the empty cell in your holder first to confirm seating, clearance and practical access for loading, levelling and cleaning.

Fit and optical alignment

Check your holder or sleeve against the 16 mm outer diameter and the full 100 mm uncapped body height. The tall body can affect insertion depth, upper clearance, removal space and the position of any support seat within the fixture.

Z Height is not established for this SKU, so this page does not define a beam-center position or a specific instrument match. If your reflectance accessory depends on a particular sample height or optical reference point, verify that geometry in your own setup before ordering.

Solvents and cleaning

This quartz cell is described for contact with acids, alkalis and organic liquids, but no concentration, temperature or exposure-time limits are specified here. Use sample-contact and cleaning conditions that match your actual process rather than treating that statement as a universal compatibility list.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. For general background on quartz cuvette constructions, see Compare fabrication methods.

Included with this option

Supplied as 1 reflectance sample cell. Additional accessories or closures are not established for this SKU.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different body size, sample access arrangement or related quartz cell geometry for your reflectance setup, send your drawing or labelled sketch together with holder details and sample conditions. We can review custom JGS1 quartz requirements through Discuss your requirements and reference part number C161WS.