
Closed-End Alumina Tube: Housing an Inserted Component
CUSTOM DESIGN GUIDE · MQATU001
MQATU001 is a source-listed 99% alumina tube, 98 mm long, with a 19.5 mm outside diameter and labelled 2 mm wall. One end is open; the other is tapered and closed. Its useful distinction from a through-tube is the enclosed endpoint around an inserted component or contents.

Use and purpose · Specifications · In practice · Custom example · Buy or enquire
A closed end changes the function of the tube
A through-tube provides access from both ends. This form accepts a component or contents through one opening and encloses the other end. Closed-end ceramic tubes are used generally in protective-sheath arrangements; the suitability of this reference depends on the actual inserted part and environment. [1]
The tapered tip belongs to the outside outline. The usable inside depth is a separate requirement, especially when an inserted component approaches the closed region. Overall length cannot describe that internal end relationship on its own.
MQATU001 configuration
Locate the inserted part and the support together
A drawing can place the inserted component inside the tube, then add the outside support. This shows the internal clearance, the point of support and the length remaining accessible above the holder. The labelled 2 mm wall is one dimension in that section, not the complete tip geometry.
The removal route matters as well. A component can fit inside the tube yet need more space above the open end to be inserted or withdrawn. The surrounding apparatus should leave that route available in the proposed operating position.
Alumina is its own material choice
This option is alumina rather than quartz. The 99% value is the declared grade for the reference, not a batch assay produced by this guide. Material selection therefore remains tied to the sample, atmosphere and operating cycle of the intended assembly.
The ceramic description does not provide a maximum temperature, thermal-shock limit or pressure rating for the complete setup. The useful design discussion can still be specific: outside fit, usable inner depth, tip clearance, support and access.
A custom example: bring an inserted component close to the closed tip
ILLUSTRATIVE DESIGN EXAMPLE
Suppose a component must extend near the closed end while the outside support stays fixed. A proposed tube can retain the support interface and define the inner depth and tip profile around that component. This targets the available internal space rather than merely requesting a longer or shorter outside length.
Order the listed configuration or discuss a change
View MQATU001 and current pricing. For a custom version, send a labelled sketch that separates the features to retain from the changes you want.
For MQATU001, include the inserted-component outline, usable-depth requirement, tip clearance and outside support. Add atmosphere and operating cycle, quantity, destination and requested date.





Recent Comments