(C214CC) Glass Rectangular Sample Cell, 21 mm / 46 mm (dual path) Path, 65 mL

Weight	100 g

SKU: C214CC

Original price was: $190.00.Current price is: $171.00.

In Stock

C214CC is a glass rectangular sample cell for visible absorbance work with two stated optical paths, 21 mm and 46 mm, in one open-top body. Its Four-Way Light layout and 65 mL nominal capacity suit direct filling where multiple optical directions and a larger sample chamber are needed. Supplied as 1 cuvette per listed price unit.

In Stock

SKU: C214CC Categories: Cuvettes, Glass Cuvettes, Products Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C214CC is a glass rectangular sample cell for visible absorbance measurements at 350–800 nm. It combines 21 mm and 46 mm optical paths in one body, together with an open top and Four-Way Light geometry. This gives you a larger cell with direct sample access and multiple stated optical directions for methods built around a larger sample volume.

Path Length: 21 mm / 46 mm (dual path)
Sample Volume (Nominal): 65 mL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Rectangular Sample Cell
Measurement Mode	Visible Absorbance Spectroscopy
Path Length	21 mm / 46 mm (dual path)
Light Transmission Configuration	Four-Way Light
Wavelength Range — Lower Limit	350 nm
Wavelength Range — Upper Limit	800 nm
Sample Volume (Nominal)	65 mL
External Dimensions	25 × 50 × 70 mm
Cell Body Dimensions	25 × 50 × 70 mm
External Dimensions Scope	Body Only
Material	Glass
Fabrication Method	Standard 80
Opening Configuration	Open Top

Choose this option

Choose C214CC when you need a larger rectangular cell with two stated path directions available in the same body. The 21 mm / 46 mm layout is useful when your measurement setup or holder needs those specific optical directions, and the open-top construction makes filling and emptying straightforward. Its 65 mL nominal capacity suits applications that use a fuller sample chamber rather than a compact bench cell.

What makes this option different

Two stated optical paths, 21 mm and 46 mm, in one rectangular cell body.
Four-Way Light geometry for optical access from multiple sides.
Open-top construction for direct filling, rinsing and emptying.
65 mL nominal capacity for larger-volume visible absorbance work at 350–800 nm.

Using this cell

Fill from the open top and keep the liquid level above the beam in the measurement orientation you plan to use. If you use both optical directions in your workflow, keep the cell orientation consistent for blank and sample runs so the 21 mm path and the 46 mm path are not confused during handling.

Hold the cell by non-optical surfaces where possible and remove visible bubbles before measurement. The 65 mL value is the nominal cell capacity, not a stated minimum working volume.

First-use check

Before first use, inspect the optical faces for residue, chips or handling marks. Rinse with a suitable liquid for your method, place the empty cell in the holder to confirm fit and clearance, and run a blank in the same orientation you will use for sample measurements.

Fit and optical alignment

The stated 25 × 50 × 70 mm dimensions apply to the body only. Check holder clearance, insertion space and beam position before ordering, especially if your instrument was designed for a smaller rectangular footprint.

Z Height is not listed for this option. If your instrument depends on a defined beam-center height, check alignment from the holder geometry and intended optical region rather than assuming compatibility from the overall body height.

Solvents and cleaning

This adhesive-bonded glass cell is listed as Standard 80. This type is generally selected for routine room-temperature aqueous samples and buffer-based work. If your process involves organic solvents, stronger chemicals, heated cleaning or long contact time, check suitability for the complete assembly before use.

Do not use hydrofluoric acid with glass. Avoid hot strong alkalis and abrasive cleaning methods, and clean the optical faces gently with non-abrasive optical tissue or another suitable soft material.

Included with this option

1 cuvette per listed price unit. If you need a supplied closure or other accessory, contact us before ordering.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for changes involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application. Prototype batches typically involve 2–4 cells; the final quantity, feasibility, specifications, price and production time are confirmed in the project quotation. Modified designs and prototype batches are quoted separately from the listed SKU. Discuss your requirements and quote part number C214CC.