(C052CC1) Glass Large-Window Cuvette, 5 mm Path, 7 mL

Weight	100 g

SKU: C052CC1

Original price was: $80.00.Current price is: $72.00.

In Stock

C052CC1 is a glass large-window cuvette for visible absorbance work from 350 to 800 nm. This open-top option combines a 5 mm optical path with a 7 mL nominal capacity in a broad 9 × 40 × 40 mm body. Supplied as 1 cuvette per sale.

In Stock

SKU: C052CC1 Categories: Cuvettes, Glass Cuvettes, Products Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C052CC1 is a glass large-window cuvette for visible absorbance measurements from 350 to 800 nm. It combines a 5 mm optical path with a 7 mL nominal capacity in an open-top body, giving you direct access for filling, rinsing and visual sample checks. The broad 9 × 40 × 40 mm format is useful when you want a larger sample chamber and need to plan around holder footprint as well as optical path.

This model uses opposing optical faces in a Two-Way Light layout. It is best selected for visible-light methods that need a fixed 5 mm path in a larger rectangular cell rather than a narrow small-volume format.

Path Length: 5 mm
Sample Volume (Nominal): 7 mL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Large-Window Cuvette
Measurement Mode	Visible Absorbance Spectroscopy
Path Length	5 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	350 nm
Wavelength Range — Upper Limit	800 nm
Sample Volume (Nominal)	7 mL
External Dimensions	9 × 40 × 40 mm
Cell Body Dimensions	9 × 40 × 40 mm
External Dimensions Scope	Body Only
Material	Glass
Fabrication Method	Standard 80
Opening Configuration	Open Top

Choose this option

Choose C052CC1 when your method needs a visible-range glass cuvette with a larger open chamber and a 5 mm path. The open top suits direct manual filling and rinsing, while the 40 × 40 mm face area and 9 mm body thickness are worth checking if your holder or surrounding hardware is designed around a different cuvette footprint.

What makes this option different

5 mm optical path for methods set up around this transmission distance.
7 mL nominal capacity in a large-window rectangular body.
Open-top access for direct filling, emptying and cleaning.
9 × 40 × 40 mm body-only dimensions for holder and clearance planning.

Using this cell

Fill from the top and make sure the liquid level covers the beam area used by your instrument. Before measurement, check that no bubbles or residue remain in the optical region, and keep the same orientation for blank and sample runs.

Because this is an open-top cell, it is suited to bench filling rather than closed transfer lines. Prompt rinsing after use helps prevent residue from drying on the inner chamber or optical faces.

First-use check

Inspect the optical faces and chamber for dust, marks or chips.
Place the empty cell in your holder to confirm seating and clearance around the body.
Fill with a reference liquid and confirm that the illuminated region is fully covered.

Fit and optical alignment

The listed 9 × 40 × 40 mm dimensions apply to the cell body. This larger square-format body can matter as much as the 5 mm path length when you are checking holder fit, side clearance and access above the opening.

Z Height is not listed for this SKU. If your instrument depends on a defined beam-center height, check alignment requirements before ordering rather than relying on outer body size alone.

Solvents and cleaning

This adhesive-bonded glass cuvette uses Standard 80 construction. It is a practical choice for routine room-temperature water-based samples and buffers. Chemical limits for this exact item are not otherwise established here, so check your sample and cleaning conditions before using organic solvents, aggressive reagents or heated cleaning.

Do not use hydrofluoric acid on glass. Avoid hot strong alkalis and abrasive cleaners, and wipe the optical faces gently with non-abrasive optical tissue.

Included with this option

1 cuvette per listed price unit. If you need a supplied closure or other accessory, contact us before ordering.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application. Prototype batches typically involve 2–4 cells; the final quantity, feasibility, specifications, price and production time are confirmed in the project quotation.

Discuss your requirements and quote part number C052CC1.