Site Navigation

(MQPCU010) Plastic Standard Cuvette, Disposable Sample Chamber, Pack of 10

Weight500 g
SKU: MQPCU010

$18.00

In Stock

MQPCU010 is a plastic standard cuvette for methods that use a 10 mm optical path and read through two opposite optical faces. Its open-top body gives direct pipette access without a lid, and the listed sale unit is a pack of 10 cuvettes supplied with a box.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQPCU010 is a plastic standard cuvette for routine measurements that use a 10 mm optical path in a standard square cuvette holder. This option uses a Two-Way Light layout and an open-top body with no lid included, making it suitable where direct filling and simple single-use handling are preferred. Its nominal capacity is 4.5 mL, and this sales option is supplied as a pack of 10.

Path Length
10 mm
Sample Volume (Nominal)
4.5 mL
Opening Configuration
Open Top

Selection Specifications

Product KindCuvette
Cell TypeStandard Cuvette
Path Length10 mm
Light Transmission ConfigurationTwo-Way Light
Wavelength Range — Lower Limit285 nm
Wavelength Range — Upper Limit750 nm
Sample Volume (Nominal)4.5 mL
External Dimensions12.5 × 12.5 × 45 mm
Body Height45 mm
Base Dimensions12.5 × 12.5 mm
MaterialPlastic
Closure IncludedNo
Opening ConfigurationOpen Top
Sales Unitpack of 10
Package Contents10 × Plastic Standard Cuvette

Choose this option

Choose MQPCU010 when your method reads through two opposite optical faces and you want an open-top plastic cuvette without an included lid. That format keeps access simple for pipetting, mixing and quick bench handling, while the pack of 10 suits routine work better than a single replacement piece. It is also useful when you want the familiar 12.5 × 12.5 mm square body format but do not need a covered top.

What makes this option different

  • 10 mm optical path for methods built around the standard path length.
  • Two-Way Light configuration for measurement through two opposite optical faces.
  • Open-top body for direct top filling and sample access during handling.
  • No lid included with this sales option.
  • 4.5 mL nominal capacity for a standard-volume sample chamber, not a stated minimum working fill.
  • Pack of 10 supplied with a box.

Using this cell

Fill from the open top and align the cuvette so the intended two optical faces sit in the beam path used by your instrument. Because this option is supplied without lids, leave enough top clearance in your workflow for pipetting and any handling steps you carry out before reading.

Before measurement, check that the sample level covers the beam region used by your setup. Remove bubbles from the light path and wipe away exterior droplets or fingerprints from the read faces.

First-use check

  1. Inspect the optical faces and sample chamber for scratches, haze, dust or handling marks.
  2. Place an empty or blank-filled cell in the holder to confirm seating and beam direction.
  3. After filling, make sure the beam area is covered and free from bubbles or exterior droplets.

Fit and optical alignment

View the English selection reference.

The body measures 12.5 × 12.5 × 45 mm, which helps you check holder fit and vertical clearance before ordering. Z Height is not established for this SKU, so if your instrument depends on a specific beam-center height, compare it with your current cell or holder drawing rather than assuming it from the outside body size alone.

The 4.5 mL value is the nominal capacity of the cell. It should not be used as a substitute for a confirmed minimum working volume.

English selection reference
Selection reference ↗

Solvents and cleaning

This is a one-piece molded plastic cuvette. Chemical compatibility is not established here for every reagent or cleaning liquid, so check the exact sample and rinse solution against the actual plastic assembly you plan to use.

Avoid abrasive cleaning and avoid using heat to force-dry the cell. If the cuvette becomes scratched, cloudy or visibly affected by the sample or rinse liquid, replace it.

Included with this option

10 plastic standard cuvettes. The listed price is for one pack of 10. This option is supplied with a box and without lids.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different material or a different cell geometry, send your current cell reference, holder details, sample conditions and required quantity through our contact page. For custom quartz projects, feasibility, specifications, quantity, price and production time are confirmed case by case.

Additional information

Weight500 g

Reviews

There are no reviews yet.

Be the first to review “(MQPCU010) Plastic Standard Cuvette, Disposable Sample Chamber, Pack of 10”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare