(MQPCU011) Plastic Standard Cuvette, Disposable Sample Chamber, Pack of 100
Description
MQPCU011 is a plastic standard cuvette for routine measurements that use a 10 mm optical path in a standard square cuvette holder. This option combines Two-Way Light optical access with an open-top body and no lid included, so it suits workflows where direct filling and larger disposable quantity are more important than a covered top. Its nominal capacity is 4.5 mL, and this sales option is supplied as a pack of 100.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 4.5 mL
- Opening Configuration
- Open Top
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Standard Cuvette |
| Path Length | 10 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 285 nm |
| Wavelength Range — Upper Limit | 750 nm |
| Sample Volume (Nominal) | 4.5 mL |
| External Dimensions | 12.5 × 12.5 × 45 mm |
| Body Height | 45 mm |
| Base Dimensions | 12.5 × 12.5 mm |
| Material | Plastic |
| Closure Included | No |
| Opening Configuration | Open Top |
| Sales Unit | pack of 100 |
| Package Contents | 100 × Plastic Standard Cuvette |
Choose this option
Choose MQPCU011 when you want a standard 10 mm path plastic cuvette in a larger pack size for regular bench use, repeated sample runs or teaching and process work. The open top keeps filling simple, and the absence of lids suits workflows that do not require a supplied cover. Its square 12.5 × 12.5 mm body format also helps when you need to match a common holder footprint while purchasing in higher quantity.
What makes this option different
- 10 mm optical path for methods built around the standard path length.
- Two-Way Light configuration for measurement through two opposite optical faces.
- Open-top body for direct top filling and easy sample access.
- No lid included with this pack configuration.
- 4.5 mL nominal capacity for a standard-volume sample chamber, not a stated minimum working fill.
- Pack of 100 supplied with a box for higher-throughput purchasing.
Using this cell
Fill from the open top and place the cuvette so the intended two optical faces align with the beam path used by your instrument. In routine multi-sample work, keeping a consistent cell orientation for blanks and samples helps maintain handling consistency across the run.
Before reading, make sure the beam area is covered by the sample and remove bubbles from the optical path. Keep the outside read faces free from fingerprints, residue and droplets.
First-use check
- Inspect the optical faces and sample chamber for scratches, haze, dust or handling marks.
- Place an empty or blank-filled cell in the holder to confirm seating and beam direction.
- After filling, confirm that the beam region is covered and free from bubbles or exterior droplets.
Fit and optical alignment
View the English selection reference.
The body measures 12.5 × 12.5 × 45 mm. Check these outer dimensions against your holder, especially if your instrument has limited top clearance or depends on a specific beam position. Z Height is not established for this SKU, so beam-center fit should be checked against your holder or current cell rather than assumed from the overall body height.
The stated 4.5 mL is the nominal capacity of the cell. It does not define a minimum working fill for your instrument.

Solvents and cleaning
This is a one-piece molded plastic cuvette. Chemical compatibility is not established here for every reagent or cleaning liquid, so check the exact sample and rinse solution against the actual plastic assembly you plan to use.
Avoid abrasive cleaning and avoid using heat to force-dry the cell. If the cuvette becomes scratched, cloudy or visibly affected by the sample or rinse liquid, replace it.
Included with this option
100 plastic standard cuvettes. The listed price is for one pack of 100. This option is supplied with a box and without lids.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
If you need a different material or a different cell geometry, send your current cell reference, holder details, sample conditions and required quantity through our contact page. For custom quartz projects, feasibility, specifications, quantity, price and production time are confirmed case by case.
Additional information
| Weight | 5000 g |
|---|
You must be logged in to post a review.








Reviews
There are no reviews yet.