Site Navigation

(MQPCU019) Plastic Semi-Micro Cuvette, Reduced Sample Chamber, Pack of 100

Weight5000 g
SKU: MQPCU019

$78.00

In Stock

MQPCU019 is a disposable plastic Semi-Micro Cuvette with a 10 mm optical path, an open top and a reduced sample chamber in a standard 12.5 × 12.5 mm square footprint. Its 1.5 mL nominal capacity suits visible-light measurements from 285 to 750 nm while keeping direct top access for filling. Sold as one pack of 100 cuvettes, without lids.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQPCU019 is a disposable plastic Semi-Micro Cuvette for visible-light measurements from 285 to 750 nm. It combines a 10 mm optical path with an open-top reduced-volume chamber in a standard 12.5 × 12.5 mm square body, so you can use a familiar holder format while working with a smaller nominal fill than a full-size cell. This option is sold as one pack of 100 cuvettes, without lids.

Path Length
10 mm
Sample Volume (Nominal)
1.5 mL
Opening Configuration
Open Top

Selection Specifications

Product KindCuvette
Cell TypeSemi-Micro Cuvette
Path Length10 mm
Light Transmission ConfigurationTwo-Way Light
Wavelength Range — Lower Limit285 nm
Wavelength Range — Upper Limit750 nm
Sample Volume (Nominal)1.5 mL
External Dimensions12.5 × 12.5 × 45 mm
Body Height45 mm
Base Dimensions12.5 × 12.5 mm
MaterialPlastic
Closure IncludedNo
Opening ConfigurationOpen Top
Sales Unitpack of 100
Package Contents100 × Plastic Semi-Micro Cuvette

Choose this option

Choose MQPCU019 when you want a semi-micro disposable cell that still uses the standard 10 mm transmission path. The open top makes filling and emptying straightforward, and the reduced sample chamber is useful when your method does not call for a larger full-volume cuvette. The one-piece molded plastic body also suits routine replacement use where washing and reusing each cell is not the goal.

What makes this option different

  • Open-top semi-micro format: you fill directly from above, with easy access for pipetting and visual checks before measurement.
  • 10 mm optical path in a reduced chamber: the cell keeps the common transmission path length while using a 1.5 mL nominal capacity semi-micro sample region.
  • Standard square footprint: the 12.5 × 12.5 mm base helps when your holder is designed around the usual square cuvette format rather than a special body shape.
  • Two-Way Light layout: measurement is taken through one opposing optical pair, so orientation in the holder should match the instrument beam direction.
  • One-piece plastic molding: the body is formed as a molded disposable plastic cuvette, which is practical for routine single-use handling and straightforward replacement after contamination or wear.
  • Pack of 100, no lids: this sales unit fits batch work that uses multiple disposable cells, and the open-top design should be selected with that lid-free handling in mind.

Using this cell

Fill the cuvette from the open top and seat it in the holder with the optical faces aligned to the beam path. Because the sample chamber is reduced-volume rather than full-size, pipette access and liquid level are part of normal setup, especially if your method uses small fills.

The stated 1.5 mL is a nominal capacity, not a minimum working volume. In use, the liquid level still needs to cover the beam region required by your instrument, and bubbles or droplets on the optical faces should be cleared before measurement.

First-use check

  1. Inspect several cuvettes from the pack for clean optical faces and undamaged chambers.
  2. Test holder seating and confirm the cell stands correctly in the orientation your instrument uses.
  3. Run a blank and check that your normal fill level covers the required beam region without bubbles.

Fit and optical alignment

View the English selection reference. Also available in the product gallery.

The body measures 12.5 × 12.5 × 45 mm, with a 12.5 × 12.5 mm base. That standard square footprint can simplify holder checks, but the recorded dimensions do not establish beam-center height or Z Height for a specific instrument.

If your instrument depends on a defined beam height, verify that separately before ordering. The cell is intended for Two-Way Light transmission through one opposing face pair, so keep the same orientation for blanks and samples.

English selection reference
Selection reference ↗

Solvents and cleaning

The exact chemical limits for this plastic cuvette are not established for this SKU. If your method involves organic solvents, aggressive reagents, heating or long contact time, check compatibility with the actual plastic material before use.

Abrasive wiping and harsh cleaning can mark the optical faces. Because this is a molded disposable plastic cell, replacement is usually the practical choice once the cuvette is contaminated, scratched or visibly worn.

Included with this option

100 Plastic Semi-Micro Cuvettes. The listed price is for one pack of 100. Lids are not included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different body size, material or optical configuration, send your holder details, sample conditions and required quantity for review.

Send a product-selection enquiry with SKU MQPCU019, your holder or instrument details, sample conditions, quantity and delivery destination.

Additional information

Weight5000 g

Reviews

There are no reviews yet.

Be the first to review “(MQPCU019) Plastic Semi-Micro Cuvette, Reduced Sample Chamber, Pack of 100”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare