Site Navigation

(MQPCU018) Plastic Standard Cuvette, 4.5 mL nominal capacity, Disposable Sample Chamber, Pack of 100

Weight1500 g
SKU: MQPCU018

$45.00

In Stock

MQPCU018 is a plastic standard cuvette with a 10 mm optical path, two-way light configuration and open-top filling. Its 4.5 mL nominal capacity suits routine sample loading, and the listed sale unit is 1 pack of 100 plastic cuvettes.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQPCU018 is a plastic standard cuvette supplied as a pack of 100. It combines a 10 mm optical path, two-way light layout and open-top sample access with a 4.5 mL nominal capacity, making it a practical choice for routine bench work where you want a standard cuvette format in single-use quantity.

Path Length
10 mm
Sample Volume (Nominal)
4.5 mL
Opening Configuration
Open Top

Selection Specifications

Product KindCuvette
Cell TypeStandard Cuvette
Path Length10 mm
Light Transmission ConfigurationTwo-Way Light
Sample Volume (Nominal)4.5 mL
MaterialPlastic
Opening ConfigurationOpen Top
Sales Unitpack of 100
Package Contents100 × Plastic Standard Cuvette

Choose this option

Choose MQPCU018 when your method uses a standard 10 mm path and reads through two opposite optical sides rather than requiring side access from multiple directions. The open top allows direct pipetting or pouring, and the 100-piece sale pack suits regular laboratory use where you want ready-to-use plastic cells for repeated blanks and samples.

What makes this option different

  • 10 mm optical path in a standard cuvette format used for routine transmission measurements.
  • Two-Way Light with optical access through two opposite sides of the cell.
  • Open-top filling for direct sample loading without a separate cap or stopper step.
  • 4.5 mL nominal capacity for planning the approximate filled volume of each cell.
  • One-piece plastic molding as the supplier’s stated construction style for this SKU.
  • Sold as 1 pack of 100 plastic standard cuvettes.

Using this cell

Fill the cuvette directly from the open top. The 4.5 mL figure is the nominal capacity, not a minimum working volume, so use a fill level that covers the beam in your instrument and suits your own method.

Before measurement, check for bubbles, droplets and fingerprints in the optical area. Keep the same orientation for blank and sample readings so the two optical faces are presented to the instrument in the same way each time.

First-use check

  1. Inspect several cells from the pack for clean optical faces and undamaged rims.
  2. Test holder fit with an empty cell or suitable blank before starting a run.
  3. After filling, remove bubbles and exterior liquid from the optical faces before measurement.

Fit and optical alignment

View the English selection reference.

The two-way light layout matters if your instrument reads through two opposite sides of the cell. Select this option for the stated two-side transmission geometry; confirm any requirement for additional side access separately.

Exact external dimensions and Z Height are not listed here. If your holder has tight dimensional limits or depends on a fixed beam-center height, check your current cell or holder drawing before ordering instead of assuming interchangeability from the standard-cuvette family name alone.

English selection reference
Selection reference ↗

Handling and cleaning

This is a one-piece molded plastic cuvette intended for routine single-use handling. That construction is useful when you want a ready-to-use disposable cell, but the exact chemical limits of the plastic are not specified here, so check your sample and any rinse liquid against the actual material before use.

If you attempt limited rinsing, avoid abrasive cleaning and avoid heat. Replace the cell if the optical area becomes scratched, cloudy or chemically affected.

Included with this option

100 plastic standard cuvettes. The listed price is for 1 pack of 100 pieces.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Need a different fit?

If you need a different material or a different cuvette geometry, send your current cell reference, holder details, sample conditions and required quantity.

Send a product-selection enquiry with SKU MQPCU018 and your holder or application details.

Additional information

Weight1500 g

Reviews

There are no reviews yet.

Be the first to review “(MQPCU018) Plastic Standard Cuvette, 4.5 mL nominal capacity, Disposable Sample Chamber, Pack of 100”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare