(MQQFC100) Quartz Flow Cell, 10 mm path, Broad Chamber with Removable Fittings
Description
MQQFC100 is a JGS1 quartz flow cell for UV/Vis spectroscopy with a 10 mm optical path, Two-Way Light access and two upright detachable PTFE fittings. Its wide 60 × 51.5 × 17 mm body is useful when the holder, mounting area or surrounding hardware is built around a broader rectangular cell rather than a slim inline format.
- Path Length
- 10 mm
- Cell Type
- Flow Cell
- Opening Configuration
- Two Detachable PTFE Fittings
Selection Specifications
| Product Kind | Flow Cell |
|---|---|
| Cell Type | Flow Cell |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 10 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| External Dimensions | 60 × 51.5 × 17 mm |
| Body Height | 17 mm |
| Base Dimensions | 60 × 51.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Port Count | 2 |
| Port Thread | M6 |
| Opening Configuration | Two Detachable PTFE Fittings |
| Fitting Material | PTFE |
| Detachable Fittings | Yes |
| Port Layout | Upright detachable fitting at the left in the referenced original; Upright detachable fitting at the right in the referenced original |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Flow Cell |
Choose this option
Choose this cell when you need a broad-body flow cell with removable fluid connections and a 10 mm transmission path. The two M6 ports with detachable PTFE fittings let you plan the connection hardware around the cell, while the wide flat body gives more surface area for support and mounting than a narrow flow-through design.
What makes this option different
- Broad rectangular body: 60 × 51.5 × 17 mm for wide-format holder or mounting layouts.
- Two detachable PTFE fittings: upright removable connection pieces rather than fixed fused tubes.
- M6 port format: both fluid ports use M6 connections for fitting selection and assembly planning.
- 10 mm Two-Way Light path: a straight transmission layout for the stated UV/Vis use.
Using this cell
Install the cell with the optical faces aligned to the beam and connect the liquid path through the two upright fittings. Support the quartz body during installation and service, and avoid lifting or positioning the cell by the fittings alone.
Fill and flush gradually so the optical region clears fully before measurement. This page does not state a working volume or pressure limit for the assembled system, so operating conditions should be set around your full liquid path, fittings and tubing.
First-use check
- Inspect the optical faces, port areas and detachable fittings before assembly.
- Check holder fit and beam alignment before connecting the full liquid path.
- After filling, remove visible bubbles from the optical region and repeat the blank if needed.
Fit and optical alignment
View the English selection reference.
The listed outside dimensions are 60 × 51.5 × 17 mm for the cell body. Check holder footprint, side clearance and the vertical space needed for the upright fittings and attached tubing.
Z Height is not listed for this item, so body size alone is not enough to confirm beam-center compatibility. Capacity information is also not settled for this SKU, so the page leaves volume planning to the dimensions and connection layout that are established here.

Solvents and cleaning
This cell uses a quartz body with detachable PTFE fittings. Choose sample and cleaning conditions for the complete wetted assembly, including the PTFE fittings and any connected tubing, rather than for the quartz body alone.
Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning on quartz surfaces, and use a cleaning routine that also suits the PTFE fitting material.
Included with this option
1 Quartz Flow Cell. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for changes involving body size, path length, port style, fittings and other installation details. Send your drawing or holder information, sample conditions and target quantity with SKU MQQFC100 through this contact page.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.











Reviews
There are no reviews yet.