(MQQFC142) Quartz Flow Cell, 10 mm path, 3.5 mL nominal capacity, Upright Threaded-Tube Layout
$239.00
MQQFC142 is a JGS1 quartz flow cell for UV/Vis work, with a 10 mm optical path, 3.5 mL nominal capacity and opposed M4 hollow threaded fittings. Its four-way light layout leaves optical access on more than one side while keeping fluid connections on opposite ends. Supplied as 1 piece.
Description
MQQFC142 is a JGS1 quartz flow cell with a 10 mm optical path, 3.5 mL nominal capacity and opposed hollow threaded fittings. It combines a compact 12.5 × 12.5 mm body section with Four-Way Light geometry, which is useful when your flow cell needs axial fluid connections while keeping optical access available on more than one side.
The fixed cell height is 60 mm, with a 45 mm body height. This layout suits installations where the plumbing runs through opposite ends of the cell and the optical arrangement needs side access around the body.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 3.5 mL
- Opening Configuration
- Two Opposed Hollow Threaded Fluid Fittings
Selection Specifications
| Product Kind | Flow Cell |
|---|---|
| Cell Type | Flow Cell |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 10 mm |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 3.5 mL |
| External Dimensions | 12.5 × 12.5 × 60 mm |
| Body Height | 45 mm |
| Base Dimensions | 12.5 × 12.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Port Count | 2 |
| Port Thread | M4 |
| Tube Outer Diameter (OD) | 3.4 mm |
| Tube Inner Diameter (ID) | 1.5 mm |
| Opening Configuration | Two Opposed Hollow Threaded Fluid Fittings |
| Port Layout | Axial threaded end A; hollow fitting shown in exact SKU image; Opposite axial threaded end B; second fitting visible in own SPU assembly image |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Flow Cell |
Choose this option
Choose MQQFC142 when your setup needs a 10 mm UV/Vis flow cell with opposed end connections rather than both lines entering from the same side or from the top. The combination of axial fittings and four-way light access can simplify the relationship between fluid routing, holder clearance and optical access in a compact installation.
What makes this option different
- Four-Way Light configuration: optical access is available on four sides of the cell.
- Opposed M4 threaded fittings: the two hollow fittings are arranged on opposite axial ends.
- Compact body section: 12.5 × 12.5 mm base with 45 mm body height.
- Shown fitting dimensions: 3.4 mm outer diameter and 1.5 mm inner diameter for connection planning.
Using this cell
Support the cell by its body during installation and connect the fluid lines without putting load on the threaded fittings. Fill gradually, watch the optical region for bubbles, and establish the blank only after the liquid path is stable.
Keep the same installed orientation for blank and sample measurements. Inlet and outlet roles are not assigned here, so fluid direction should follow your own system design.
First-use check
- Inspect the optical faces and threaded connection ends for damage or residue.
- Check holder fit and tubing approach before introducing liquid.
- After filling, confirm that the optical region is free of visible bubbles before running the blank.
Fit and optical alignment
View the English selection reference.
Check both the body envelope and the end-connection approach in your holder. The body section is 12.5 × 12.5 mm, the fixed cell height is 60 mm, and the opposed fittings need straight access space at both ends for tubing and connection hardware.
Z Height is not established for this SKU, so beam position should be checked against your fixture or current cell before ordering. Pressure limits are not established here, so operating conditions should be defined for the full assembled flow path.

Solvents and cleaning
This item uses fused-integrated construction in supplier terminology, but a specific MQ fabrication category is not established here. Choose the sample and cleaning routine around the complete wetted assembly, including your added tubing and connectors, especially for aggressive liquids, elevated temperature or long contact times.
Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaning methods. Clean the optical faces gently, and flush the internal liquid path with a method suitable for the complete assembly.
Included with this option
1 Quartz Flow Cell. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz flow cells for requirements involving path length, body dimensions, connection layout, optical access, Z Height and related fit details. Send a labelled drawing or sketch together with your tubing information, liquid conditions and required quantity.
Send a product-selection enquiry with SKU MQQFC142 and your holder or fluid-path details.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.








Reviews
There are no reviews yet.