(MQQFC128) Quartz Flow Cell, 0.5 mm path, 350 µL nominal capacity, Shorter Polygonal Chamber
$468.00
Quartz flow cell for UV/Vis work with a 0.5 mm optical path, 350 µL nominal capacity and two opposed quartz tubes. This JGS1 quartz version uses a shorter 30 × 23 × 0.5 mm internal section and Molded 83 fabrication for compact inline layouts. Sold as 1 piece.
Description
MQQFC128 is a JGS1 quartz flow cell for UV/Vis setups that need a 0.5 mm optical path in a compact inline format. Its 350 µL nominal capacity, 30 × 23 × 0.5 mm internal dimensions and opposed tube connections let you plan the optical section and the fluid route together when space is limited around the cell body.
- Path Length
- 0.5 mm
- Sample Volume (Nominal)
- 350 µL
- Opening Configuration
- Two Opposed Fluid Tubes
Selection Specifications
| Product Kind | Flow Cell |
|---|---|
| Cell Type | Flow Cell |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 0.5 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 350 µL |
| Internal Dimensions | 30 × 23 × 0.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Port Count | 2 |
| Tube Outer Diameter (OD) | 4 mm |
| Tube Inner Diameter (ID) | 2 mm |
| Fabrication Method | Molded 83 |
| Opening Configuration | Two Opposed Fluid Tubes |
| Port Layout | End/side connection at the left in the referenced original; Opposite end/side connection at the right in the referenced original |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Flow Cell |
Choose this option
Choose MQQFC128 when you want this 0.5 mm path format with the shorter internal chamber of the series. It suits installations where the specified polygonal sample region and straight-through connection layout are important, but you do not want the longer chamber version.
What makes this option different
- 0.5 mm optical path for short-path UV/Vis transmission work.
- 350 µL nominal capacity matched to the shorter chamber format.
- 30 × 23 × 0.5 mm internal dimensions for planning the actual sample region rather than only the outer shape.
- Two opposed quartz tubes, 4 mm OD and 2 mm ID for a left-to-right inline connection layout.
Using this cell
Install the cell so the beam passes through the 0.5 mm path in the intended measurement direction. Fill and flush the flow path slowly to remove bubbles from the optical region before collecting a blank or sample reading.
Support the cell by its body during setup rather than using the projecting quartz tubes as handles. No pressure rating is stated, so pressurized use should be reviewed against your own liquid circuit and connection method.
First-use check
- Inspect the optical faces and tube ends for chips, residue or transport damage.
- Test holder fit and tubing route before introducing sample.
- Run a blank after the flow path is fully wetted and free of visible bubbles.
Fit and optical alignment
View the English selection reference. Also available in the product gallery.
Plan clearance for the body and for tubing on both ends. The tube dimensions are specified, but a complete confirmed assembly envelope is not available for this SKU, so holder space should be checked from the actual body geometry and connection approach rather than from one overall size figure.
Z Height is not listed for this cell. If your instrument or holder depends on a fixed beam-center height, check that alignment separately before ordering.

Solvents and cleaning
This cell is made from JGS1 quartz with Molded 83 fabrication. That style is often selected for quartz cells used with organic-solvent methods or temperature-related cleaning steps, but the sample and cleaning routine should be reviewed for the complete wetted assembly.
Chemical limits are not specified for this exact SKU. Do not use hydrofluoric acid with quartz, avoid hot strong alkalis and abrasive cleaners, and clean the optical faces gently with suitable non-abrasive lab wipes.
Included with this option
1 Quartz Flow Cell.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We also coordinate custom JGS1 quartz projects for changes in path length, capacity, body size, connections or other drawing-based requirements. Modified designs are quoted separately from the listed SKU.
Send a product-selection enquiry with SKU MQQFC128, your holder details, connection layout, sample conditions and required quantity.
Additional information
| Weight | 150 g |
|---|
You must be logged in to post a review.








Reviews
There are no reviews yet.