(MQQFL020) Quartz Flow Cell, 10 mm path, 5.8 mL nominal capacity, Long Sample Chamber
$599.00
MQQFL020 is a JGS1 quartz flow cell with a 10 mm optical path, 5.8 mL nominal capacity and a long sample chamber. It combines Two-Way Light geometry with one fixed 4 mm OD / 2 mm ID tube at one end and an open end at the other. Sold as 1 piece.
In Stock
Description
MQQFL020 is a JGS1 quartz flow cell with a 10 mm optical path and 5.8 mL nominal capacity. Its long sample chamber, one-tube-plus-open-end layout and 79 × 12.5 × 12.5 mm uncapped envelope make it suitable where you want direct access to the sample region as well as a fixed tube connection on one side.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 5.8 mL
- Opening Configuration
- One Fluid Tube and One Open End
Selection Specifications
| Product Kind | Flow Cell |
|---|---|
| Cell Type | Flow Cell |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 10 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 5.8 mL |
| External Dimensions | 79 × 12.5 × 12.5 mm |
| Uncapped Cell Dimensions | 79 × 12.5 × 12.5 mm |
| External Dimensions Scope | Uncapped Cell |
| Material | Quartz |
| Material Grade | JGS1 |
| Port Count | 1 |
| Tube Outer Diameter (OD) | 4 mm |
| Tube Inner Diameter (ID) | 2 mm |
| Fabrication Method | Molded 83 |
| Opening Configuration | One Fluid Tube and One Open End |
| Port Layout | Single fixed tube at the left axial end in the referenced original |
| Wall Thickness | 1.25 mm |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Flow Cell |
Choose this option
Choose this cell when your method benefits from a larger nominal volume than a compact flow cell and the open-end access suits how you fill, drain or inspect the sample region. The single fixed tube provides one defined connection point, while the opposite open end leaves the chamber accessible for handling that would be awkward in a fully closed two-port body.
What makes this option different
- 5.8 mL nominal capacity with a 10 mm optical path in a long sample chamber.
- One fixed tube and one open end for a different loading and connection layout from closed two-port cells.
- Fixed tube size of 4 mm OD / 2 mm ID for planning external connection hardware.
- Molded 83 JGS1 quartz construction with Two-Way Light geometry for UV/Vis use.
Structure and dimensions
Using this cell
Support the cell body during handling and installation, and do not use the fixed tube as a handle. Because this version has one open end, fill and drain it in a way that keeps the optical region covered and free of trapped bubbles before taking a blank or sample reading.
The 5.8 mL figure is the nominal capacity, not a stated minimum working volume. If your method runs close to the lowest practical fill level, check that your actual fill in the intended mounting position keeps the beam path covered consistently.
First-use check
- Inspect the optical faces, the open end and the fixed tube connection for particles or handling residue.
- Test the fit in your holder and run a blank with the cell in its intended measuring position.
- Fill slowly and verify that the illuminated region is fully wetted and free of bubbles.
Fit and optical alignment
View the English selection reference.
The fixed-parts envelope is 79 × 12.5 × 12.5 mm, excluding separately attached flexible tubing and removable caps. Check holder length, side clearance and access to the open end separately from the optical body fit.
Z Height is not established for this SKU, so do not assume beam-center compatibility from the overall dimensions alone. If your instrument or holder requires a defined beam height, that point should be checked before ordering.
Solvents and cleaning
Molded 83 is commonly chosen for methods involving organic solvents and temperature-related applications, but suitability still depends on the complete assembly and the actual liquid conditions. The source also describes this construction as acid- and alkali-resistant in general terms, but specific chemical limits are not established here.
Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning materials, and clean the optical faces gently with non-abrasive optical tissue. For aggressive chemicals, elevated temperature or long contact times, please review the full liquid conditions before use.
Included with this option
1 Quartz Flow Cell. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz projects for changes to path length, chamber size, overall dimensions, openings and connections. Send a drawing or labelled sketch together with holder details, sample conditions and quantity through the contact page if you need a different geometry from the listed SKU.
Additional information
| Weight | 150 g |
|---|
You must be logged in to post a review.
Reviews
There are no reviews yet.