(MQQFL055) Quartz Screw-Top Cuvette, 1 mm path, Valve Closure Assembly, Pack of 2
$780.00
MQQFL055 is a JGS1 quartz screw-top cuvette with a 1 mm optical path, Four-Way Light optical access and a valve closure assembly for UV/Vis and fluorescence work. Its 350 µL nominal capacity keeps the format compact, and this listing is sold as a pack of 2 with accompanying closures.
Description
MQQFL055 is a JGS1 quartz screw-top cuvette for UV/Vis and fluorescence measurements with a 1 mm optical path and Four-Way Light optical access. The valve closure assembly gives you enclosed sample handling in a compact 350 µL nominal-volume cell, while the four optical faces suit setups that need side access as well as the main transmission direction. This listing is sold as a pack of 2 with accompanying closures.
- Path Length
- 1 mm
- Sample Volume (Nominal)
- 350 µL
- Closure Type
- Valve Closure Assembly
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Screw-Top Cuvette |
| Measurement Mode | Fluorescence Spectroscopy; UV/Vis Spectroscopy |
| Path Length | 1 mm |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 350 µL |
| Cell Body Dimensions | 12.5 × 3.5 × 35 mm |
| Overall Height without Closure | 64 mm |
| Body Height | 35 mm |
| Overall Height with Closure | 81 mm |
| Base Dimensions | 12.5 × 3.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Closure Type | Valve Closure Assembly |
| Closure Included | Yes |
| Port Thread | M10 |
| Fabrication Method | Molded 83 |
| Sales Unit | pack of 2 |
| Package Contents | 2 × Quartz Screw-Top Cuvette; Accompanying closures |
Choose this option
Choose MQQFL055 when your method uses a 1 mm path in a closed small-format cell and your measurement geometry benefits from optical access on four sides. The valve-style top arrangement is useful when the sample is introduced and handled through the closure rather than through an open chamber, and the two-cell sale unit suits workflows that want the listed quantity in one order line.
What makes this option different
- 1 mm optical path for short-path UV/Vis and fluorescence methods.
- Four-Way Light layout for optical access on four sides in compatible setups.
- Valve closure assembly with M10 thread at the top interface.
- 350 µL nominal capacity in a compact body rather than a standard large-volume cuvette format.
- Sold as a pack of 2 with accompanying closures.
- Molded 83 fabrication category for this SKU.
Using this cell
Fill and operate the cell through the supplied closure assembly, then keep the same orientation for blank and sample measurements. Before reading, make sure the illuminated region is fully covered and free from trapped bubbles or residue.
Handle the closure gently while supporting the cell body. No pressure rating, leak-rate specification or minimum working volume is stated here, so this cuvette should not be selected on the assumption of a defined pressure, vacuum or low-fill performance.
First-use check
- Inspect the optical faces, closure assembly and sample region for chips, residue or transit damage.
- Place the cell in the holder and verify that it sits securely and in the intended orientation.
- Run a blank first, then recheck after filling and bubble removal.
Fit and optical alignment
View the English selection reference.
The base measures 12.5 × 3.5 mm, the body height is 35 mm, and the overall height with cap is 81 mm. Check holder clearance for the narrow body, the neck area and the operating space above the installed closure, not just the optical section of the cell.
Z Height is not specified for this SKU. If your instrument or accessory has a fixed optical centerline, check beam height against your holder before ordering.

Solvents and cleaning
Molded 83 quartz is commonly selected for methods that may involve organic solvents or temperature-related operating conditions, but suitability depends on the complete assembled cell, including the closure parts.
If your liquid is aggressive, heated or used for extended contact, please check the chemical name, concentration, temperature and contact time before use. Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning materials. Clean the exterior optical faces with a soft, non-abrasive optical wipe.
Included with this option
2 quartz screw-top cuvettes with accompanying closures. The listed price is for the pack of 2. The two-cell sales unit does not by itself indicate an optically matched pair.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for changes to path length, volume, external envelope, optical windows, Z Height, closures, interfaces and tolerance requirements. If you need a modified version, please send your holder details or drawing, the sample conditions and the quantity required via our contact page.
Additional information
| Weight | 1750 g |
|---|
You must be logged in to post a review.











Reviews
There are no reviews yet.