Site Navigation

(MQQFL057) Quartz Screw-Top Cuvette, 10 mm path, Valve Closure Assembly, Pack of 2

Weight150 g
SKU: MQQFL057

$720.00

In Stock

MQQFL057 is a JGS1 quartz screw-top cuvette with a 10 mm optical path, five-way optical access and a valve closure assembly. Its 3.5 mL nominal capacity and M10 top thread suit UV/Vis and fluorescence setups that need enclosed sample access from above and optical access from multiple sides. Supplied as a pack of 2 with accompanying closures.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQFL057 is a JGS1 quartz screw-top cuvette supplied as a pack of 2. Each cell combines a 10 mm optical path, a 3.5 mL nominal capacity and five-way optical access with a valve closure assembly, giving you a quartz measurement cell with top-controlled sample access and added side access around the sample region. This is a practical choice when you need two cells of the same listed geometry for paired work or repeated measurement routines.

Path Length
10 mm
Sample Volume (Nominal)
3.5 mL
Closure Type
Valve Closure Assembly

Selection Specifications

Product KindCuvette
Cell TypeScrew-Top Cuvette
Measurement ModeFluorescence Spectroscopy; UV/Vis Spectroscopy
Path Length10 mm
Light Transmission ConfigurationFive-Sided Optical Windows
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
Sample Volume (Nominal)3.5 mL
Cell Body Dimensions12.5 × 12.5 × 35 mm
Overall Height without Closure64 mm
Body Height35 mm
Overall Height with Closure81 mm
Base Dimensions12.5 × 12.5 mm
MaterialQuartz
Material GradeJGS1
Closure TypeValve Closure Assembly
Closure IncludedYes
Port ThreadM10
Fabrication MethodMolded 83
Sales Unitpack of 2
Package Contents2 × Quartz Screw-Top Cuvette; Accompanying closures

Choose this option

Choose MQQFL057 when you need the 10 mm valve-top version in a two-cell sales pack rather than a single piece. It suits UV/Vis and fluorescence setups where the sample is handled through the top assembly and the measurement layout uses more than the two main transmission faces.

What makes this option different

  • Pack of 2 complete cuvettes in the listed configuration.
  • 10 mm optical path with 3.5 mL nominal capacity per cell.
  • Five-way optical access for setups that use additional optical faces around the sample region.
  • Valve closure assembly with M10 threaded top connection for controlled filling or handling from above.

Using this cell

Fill the cell so the sample covers the illuminated region, then remove bubbles before measurement. When operating the valve closure, support the cell body and avoid using the holder as the only support point for the top assembly.

The nominal volume is 3.5 mL per cell. It should not be treated as a minimum working volume, so low-fill methods and fixed beam-height methods should be checked against your own setup before purchase.

First-use check

  1. Inspect both cells for clean optical faces, intact edges and a clear sample chamber.
  2. Test holder fit and top clearance before introducing sample.
  3. Run a blank in the intended orientation, then repeat after filling to confirm stable alignment and bubble-free loading.

Fit and optical alignment

View the English selection reference. Also available in the product gallery.

Each cell has a 12.5 × 12.5 mm base, a 35 mm body height and an 81 mm overall height with the closure fitted. Check not only the holder slot, but also the vertical clearance needed for the neck, valve area and hand access above the instrument or fixture.

The five-way optical layout describes the available optical access, not automatic compatibility with a particular instrument. Keep the same orientation for blank and sample work, and make sure the holder does not block any side your measurement geometry requires. Z Height is not specified for this SKU.

English selection reference
Selection reference ↗

Solvents and cleaning

Molded 83 quartz is commonly selected for methods that may involve organic solvents or elevated temperatures, but the exact liquid compatibility of the full assembly still depends on the complete cell and closure. For aggressive chemicals, heated conditions or long contact times, please check the intended conditions before use.

Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning methods. Clean the optical faces gently with non-abrasive tissue and a suitable cleaning liquid for your process.

Included with this option

2 Quartz Screw-Top Cuvettes with accompanying closures. The listed price is for one pack of 2.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closure details and tolerances. If you need a modified version, please send your drawing or holder information and sample conditions through our contact page.

Additional information

Weight150 g

Reviews

There are no reviews yet.

Be the first to review “(MQQFL057) Quartz Screw-Top Cuvette, 10 mm path, Valve Closure Assembly, Pack of 2”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare