(MQQMC021) Quartz Micro Cuvette, 3 mm path, 1.05 mL nominal capacity, 3 mm Slit, Broad Optical Faces
$101.00
MQQMC021 is an open-top JGS1 quartz micro cuvette with a 3 mm optical path, 1.05 mL nominal capacity and Two-Way Light access through its broad opposing faces. The 12.5 × 12.5 × 45 mm body houses a narrow sample chamber. Standard 80 adhesive-bonded construction for room-temperature aqueous work; sold as one cell.
Description
MQQMC021 is a JGS1 quartz micro cuvette for UV/Vis spectroscopy, combining a 3 mm optical path with a 1050 µL nominal capacity in a compact open-top body. It is a practical choice when you need a shorter path length than a 10 mm cell but still want direct top filling and a familiar square-body format for holder-based work. The optical layout is Two-Way Light.
- Path Length
- 3 mm
- Sample Volume (Nominal)
- 1.05 mL
- Opening Configuration
- Open Top
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Micro Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 3 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 1.05 mL |
| External Dimensions | 12.5 × 12.5 × 45 mm |
| Cell Body Dimensions | 12.5 × 12.5 × 45 mm |
| External Dimensions Scope | Body Only |
| Body Height | 45 mm |
| Base Dimensions | 12.5 × 12.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Fabrication Method | Standard 80 |
| Opening Configuration | Open Top |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Micro Cuvette |
Choose this option
Choose MQQMC021 when your method is built around a 3 mm path and you want straightforward top access for pipetting, filling and visual inspection. The open rectangular body keeps handling simple, while the compact 12.5 × 12.5 mm footprint helps when your holder is designed around the standard square cuvette form rather than a wider special body.
What makes this option different
- 3 mm optical path for methods that need a shorter path than a standard 10 mm cell.
- Open-top body for direct filling and easy access to the sample region.
- 1050 µL nominal capacity in a micro cuvette format.
- Two-Way Light layout through the broad opposing faces. The narrow slit faces are not the intended transmission direction.
Structure and dimensions

Using this cell
Fill the cell from the top and align the broad transmitting faces with the beam. The specified 3 mm slit and 3 mm optical path describe different aspects of the chamber; the slit is not a second optical path or a guaranteed clear optical aperture. Keep the same orientation for blank and sample measurements. Before reading, check that the optical region is free of bubbles and that the outer optical faces are clean and dry.
The stated 1050 µL is the nominal capacity of the cell, not a minimum working volume. In routine use, the liquid level still needs to cover the beam position in your own instrument.
First-use check
- Inspect the optical faces and top opening for chips, marks or residue.
- Place the cell in your holder and confirm the intended optical direction.
- Run a blank after filling to make sure the beam is fully covered and bubble-free.
Fit and optical alignment
View the English selection reference.
The stated 12.5 × 12.5 × 45 mm dimensions apply to the body. Use them to check holder seating and top-access clearance, especially if your instrument enclosure or fixture leaves little room above the cell.
Z Height is not specified for this option. If your instrument depends on a known beam-centre height, check that point separately rather than relying on the outer body dimensions alone.

Solvents and cleaning
Standard 80 indicates an adhesive-bonded quartz construction. It is typically selected for room-temperature water-based samples and buffer solutions.
Avoid organic samples and organic cleaning solvents with this adhesive-bonded cell. Do not use hydrofluoric acid with quartz, and avoid hot strong alkalis and abrasive cleaning methods. Clean the optical faces gently with suitable non-abrasive optical tissue or lab wipes.
Included with this option
1 Quartz Micro Cuvette.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz projects for changes to dimensions, optical path length, sample volume, optical windows or Z Height, opening details, and fabrication or tolerance requirements. Send a product-selection enquiry and quote SKU MQQMC021.
For a modified JGS1 quartz version, send a labelled drawing, holder and beam details, sample and cleaning conditions, and target quantity. Prototype batches typically involve 2–4 cells; feasibility, final specifications, price and production time are confirmed in the project quotation.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.









Reviews
There are no reviews yet.