(MQQSC030) Quartz Screw-Top Cuvette, 5 mm path, Large Screw Opening, Pack of 2
Description
MQQSC030 is a JGS1 quartz screw-top cuvette for UV/Vis measurements where you want a shorter 5 mm path with top access and side optical access in the same cell. Its large M10 screw opening makes filling and re-closing straightforward, while the Four-Way Light layout is useful when your setup needs optical access from more than one side. Each cell has a 1750 µL nominal capacity, and this sales option is supplied as a pack of 2 with accompanying closures.
- Path Length
- 5 mm
- Sample Volume (Nominal)
- 1.75 mL
- Closure Type
- Screw Cap
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Screw-Top Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 5 mm |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 1.75 mL |
| Body Height | 38 mm |
| Overall Height with Closure | 58 mm |
| Base Dimensions | 12.5 × 7.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Closure Type | Screw Cap |
| Closure Included | Yes |
| Port Thread | M10 |
| Fabrication Method | Molded 0.01 |
| Sales Unit | pack of 2 |
| Package Contents | 2 × Quartz Screw-Top Cuvette; Accompanying closures |
Choose this option
Choose MQQSC030 when your method is built around a 5 mm path and you prefer a screw-cap format instead of an open-top cell. The threaded top opening gives direct access for loading, emptying and cleaning the sample chamber, and the Four-Way Light arrangement suits UV/Vis work where the holder and beam geometry need side optical access. This listing is the two-cell sales option, so it is suitable when you need the same specification supplied as one pack of 2.
What makes this option different
- 5 mm optical path suits methods specified for this shorter path length, so selection should follow the path your procedure or holder position requires rather than a standard 10 mm assumption.
- Four-Way Light access gives optical access on multiple sides of the cell body, which is useful when your setup depends on side-facing beam or observation geometry.
- M10 screw opening provides top access for filling, emptying and re-closing the cell, so you can handle the sample through a threaded opening rather than an uncovered top.
- 1750 µL nominal capacity per cell gives the chamber size for filling planning, but it should not be treated as a minimum working volume.
- Optical-contact construction is the source term for this cell’s construction, paired here with a screw-cap access arrangement rather than a removable plate or stopper-style closure.
- Pack of 2 means the listed price is for two cuvettes in one sales pack, with accompanying closures included for that pack.
Using this cell
Fill the cell through the screw opening from the top, then fit the closure as needed for your measurement routine. When using both cells for blanks, samples or duplicate preparation, keep the same handling and orientation from one run to the next.
Before measurement, make sure the liquid level covers the illuminated region used by your instrument and remove any bubbles or exterior droplets. The stated 1750 µL value is a nominal capacity for each cell, not a working-fill instruction.
First-use check
- Inspect both cells for clean optical faces and a clean sample chamber.
- Test holder fit and beam alignment with a suitable blank before routine use.
- Check that the closure can be fitted and removed without interference from the holder or instrument cover.
Fit and optical alignment
View the English selection reference.
The base dimensions are 12.5 × 7.5 mm. The optical body height is 38 mm, and the overall height with the cap fitted is 58 mm, so check both holder fit and the vertical space needed to remove or refit the cap during use.
Z Height is not established for this SKU. Align the beam against your actual holder and instrument geometry rather than inferring beam position from the overall height. The M10 thread identifies the closure connection only; no pressure rating is established here.

Solvents and cleaning
This cell is described in the source as using optical-contact construction, and the current glossary mapping is Molded 0.01. For this type, the practical selection point is a method that needs a closely specified optical path; if your order depends on a particular path tolerance or measurement condition, agree that requirement for the order.
The chemical limits for this exact SKU are not established here, and suitability depends on the complete assembled cell, including the closures. If your work involves specific solvents, heating or cleaning agents, check the full exposure conditions before ordering.
Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning methods. Clean the optical faces gently with non-abrasive laboratory tissue or another suitable non-scratching material.
Included with this option
2 Quartz Screw-Top Cuvettes and accompanying closures. The listed price is for 1 pack of 2.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for changes involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send your drawing or holder details, sample conditions, quantity and delivery destination through our contact page, and include SKU MQQSC030 for reference.
Additional information
| Weight | 200 g |
|---|
You must be logged in to post a review.







Reviews
There are no reviews yet.