(MQQSC034) Quartz Screw-Top Cuvette, 5 mm path, Large Screw Opening, Pack of 2
Description
MQQSC034 is a quartz Screw-Top Cuvette for UV/Vis spectroscopy with a 5 mm optical path, a large screw opening and a Two-Way Light layout. It suits methods that use one main transmission axis and also benefit from direct top access for filling, rinsing and capping. This option is supplied as a pack of 2 with accompanying closures.
- Path Length
- 5 mm
- Cell Type
- Screw-Top Cuvette
- Closure Type
- Screw Cap
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Screw-Top Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 5 mm |
| Light Transmission Configuration | Two-Way Light |
| Material | Quartz |
| Closure Type | Screw Cap |
| Closure Included | Yes |
| Fabrication Method | Molded 83 |
| Sales Unit | pack of 2 |
| Package Contents | 2 × Quartz Screw-Top Cuvette; Accompanying closures |
Choose this option
Choose MQQSC034 when you need two matching 5 mm quartz cells with removable screw caps for routine UV/Vis work, duplicate preparation or parallel handling. The screw-top format keeps access to the sample chamber simple, while the Two-Way Light layout stays focused on a single transmission direction through opposing faces.
What makes this option different
- 5 mm optical path for methods specified around this shorter transmission length.
- Two-Way Light configuration for transmission measurements through one opposing pair of optical faces.
- Large screw opening helps with direct filling, rinsing and cap access from the top.
- Pack of 2 supplied with accompanying closures under one listed sale unit.
Using this cell
Use the 5 mm path in your method setup and keep the same seating and orientation for blanks and samples. Fill high enough to cover the illuminated region used by your instrument, and remove visible bubbles before measurement.
After loading, fit the screw caps carefully and keep the outer optical faces free from droplets, fingerprints and residue. The capped opening is for sample access and covered handling; it is not presented here as a pressure-rated fitting.
First-use check
- Inspect both cells for clean optical faces, an undamaged sample chamber and proper cap fit.
- Place each cell in the holder and confirm that the beam passes through the intended optical faces.
- Run a blank in the same orientation you plan to use for measurement, then confirm bubble-free filling over the illuminated region.
Fit and optical alignment
View the English selection reference.
Check that your holder allows clearance for the cuvette body, neck and cap, especially above the cell position where cap removal needs room. Z Height is not established for this exact item, so do not assume beam alignment from the optical path alone.
Nominal volume and minimum working volume are not established for this SKU. If your setup depends on a defined beam center height, insertion depth or low fill level, please review the application before purchase.

Solvents and cleaning
This cuvette is listed as Molded 83. In MQ’s fabrication range, this type is commonly selected for methods that may involve organic solvents or heated conditions, but the exact chemical limits for this SKU are not established here.
Choose the sample and cleaning routine for the complete assembly, including the closures. Keep hydrofluoric acid away from quartz, avoid hot strong alkalis and abrasive cleaning methods, and wipe the exterior optical faces only with a gentle non-abrasive optical tissue or similar lab wipe.
Included with this option
2 Quartz Screw-Top Cuvettes and accompanying closures. The listed price is for the pack of 2.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for requirements involving optical path length, external fit, window arrangement, Z Height, closure details and fabrication or tolerance needs. Send your drawing or holder details together with sample conditions and the dimensions that are critical to your setup.
Send a product-selection enquiry with SKU MQQSC034 if you need a different geometry or would like us to review holder fit before ordering.
Additional information
| Weight | 200 g |
|---|
You must be logged in to post a review.







Reviews
There are no reviews yet.