Site Navigation

(MQQSC033) Quartz Screw-Top Cuvette, 5 mm path, Large Screw Opening

Weight100 g
SKU: MQQSC033

$185.00

In Stock

MQQSC033 is a quartz Screw-Top Cuvette for UV/Vis work with a 5 mm optical path, Two-Way Light geometry and a large screw opening for direct top access. The included screw cap supports covered handling between filling and measurement. Sold as 1 piece with accompanying closure.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQSC033 is a quartz Screw-Top Cuvette for UV/Vis spectroscopy with a 5 mm optical path, a large screw opening and a Two-Way Light layout. It suits methods that use a straightforward transmission axis while still benefiting from direct top access for filling, rinsing and capping. This listing is sold as 1 piece with an accompanying closure.

Path Length
5 mm
Cell Type
Screw-Top Cuvette
Closure Type
Screw Cap

Selection Specifications

Product KindCuvette
Cell TypeScrew-Top Cuvette
Measurement ModeUV/Vis Spectroscopy
Path Length5 mm
Light Transmission ConfigurationTwo-Way Light
MaterialQuartz
Closure TypeScrew Cap
Closure IncludedYes
Fabrication MethodMolded 83
Pack Quantity1 Piece
Package Contents1 × Quartz Screw-Top Cuvette; Accompanying closure

Choose this option

Choose MQQSC033 when you need a 5 mm quartz cell with a removable screw cap and light passing through one opposing pair of faces. It is a practical choice for routine transmission measurements where you want top access to the sample chamber, then covered handling between preparation, blanking and measurement.

What makes this option different

  • 5 mm optical path for methods built around this shorter transmission length.
  • Two-Way Light configuration for measurements that use one main optical axis through opposing faces.
  • Large screw opening gives direct top access for filling, rinsing and cap removal.
  • Single-cell sale unit supplied as 1 piece with an accompanying closure.

Structure and dimensions

Product structure and the listed configuration.
Product structure and the listed configuration.Open image ↗

Using this cell

Fill the cell so the liquid fully covers the illuminated region used by your instrument. Keep the same orientation for blank and sample measurements, and remove visible bubbles before reading, especially if the liquid wets the walls unevenly.

After filling, fit the screw cap carefully and keep the exterior optical faces clean and dry. The cap is useful for covered sample handling, but this product is not presented here as a pressure-rated flow or sealed reaction cell.

First-use check

  1. Inspect the optical faces and sample chamber for chips, residue or handling marks.
  2. Test the fit in your holder and confirm that the beam passes through the intended optical faces.
  3. Run a blank in the same orientation you will use for samples, then verify that filling covers the illuminated region without bubbles.

Fit and optical alignment

View the English selection reference.

Check holder clearance for the body, neck and cap before ordering, particularly if your compartment is tight above the cell position. Z Height is not established for this SKU, so beam position should be checked in your actual holder rather than assumed from the 5 mm path alone.

Nominal volume and minimum working volume are also not established for this exact item. If your application depends on a specific fill level, insertion depth or beam center height, please review the fit against your instrument before purchase.

English selection reference
Selection reference ↗

Solvents and cleaning

This cuvette is listed as Molded 83. In MQ’s fabrication range, this type is commonly selected for methods that may involve organic solvents or heated conditions, but the exact chemical limits for this SKU are not established here.

Use a cleaning routine appropriate to the complete assembly, including the closure. Keep hydrofluoric acid away from quartz, avoid hot strong alkalis and abrasive cleaning methods, and clean the exterior optical faces only with a gentle, non-abrasive optical wipe.

Included with this option

1 Quartz Screw-Top Cuvette and accompanying closure. The listed price is for 1 piece.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving optical path length, external fit, window arrangement, Z Height, closure details and fabrication or tolerance needs. Send your drawing or holder details together with sample conditions and the dimensions that matter for your setup.

Send a product-selection enquiry with SKU MQQSC033 if you need a different geometry or want us to review holder fit before ordering.

Additional information

Weight100 g

Reviews

There are no reviews yet.

Be the first to review “(MQQSC033) Quartz Screw-Top Cuvette, 5 mm path, Large Screw Opening”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare