Site Navigation

(MQQSC035) Quartz Screw-Top Cuvette, 5 mm path, Large Screw Opening

Weight100 g
SKU: MQQSC035

$317.00

In Stock

MQQSC035 is a quartz screw-top cuvette with a 5 mm optical path, Four-Way Light configuration and a large screw opening for direct filling. An accompanying closure is included, and this option is supplied as 1 piece.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQSC035 is a quartz screw-top cuvette with a 5 mm optical path, Four-Way Light configuration and a large threaded top opening. It is a practical choice when you want direct access for filling and cleaning, while keeping a removable closure available for covered handling during use. This listing is for 1 piece with an accompanying closure.

Path Length
5 mm
Cell Type
Screw-Top Cuvette
Closure Type
Screw Cap

Selection Specifications

Product KindCuvette
Cell TypeScrew-Top Cuvette
Measurement ModeUV/Vis Spectroscopy
Path Length5 mm
Light Transmission ConfigurationFour-Way Light
MaterialQuartz
Closure TypeScrew Cap
Closure IncludedYes
Fabrication MethodMolded 0.01
Pack Quantity1 Piece
Package Contents1 × Quartz Screw-Top Cuvette; Accompanying closure

Choose this option

Choose MQQSC035 when your method uses a 5 mm path and benefits from optical access on four sides of the cell body. The large screw opening is useful when pipetting, rinsing or sample exchange is easier from the top than with a narrower neck or open-top format.

What makes this option different

  • 5 mm optical path for methods built around this shorter transmission length.
  • Four-Way Light configuration for optical access on four sides of the cuvette body.
  • Large screw opening with included closure for direct top access and covered handling.
  • Molded 0.01 fabrication for this listed option.

Structure and dimensions

Product structure and the listed configuration.
Product structure and the listed configuration.Open image ↗

Using this cell

Fill the cell through the threaded top opening and fit the closure as needed by your procedure. Keep blank and sample measurements in the same orientation, and make sure the sample covers the illuminated region used by your setup.

Before reading, remove visible bubbles and keep the outer optical faces clean and dry. Handle the cell by non-optical areas where possible to reduce marks on the light path surfaces.

First-use check

  1. Inspect the optical faces and the threaded opening for chips, residue or handling marks.
  2. Place the cell in the holder and verify that it seats correctly and aligns with the light path.
  3. Run a blank in the same orientation you will use for samples.

Fit and optical alignment

View the English selection reference. Also available in the product gallery.

Check holder opening, insertion space and the clearance needed above the cell to fit or remove the screw closure. This cell uses a threaded top closure, but that does not establish a pressure-rated connection.

Z Height is not established for this SKU, so beam-height compatibility should be checked against your instrument. Nominal capacity is also not established here for this exact option, so if fill volume is critical to your method, please review that point before ordering.

English selection reference
Selection reference ↗

Solvents and cleaning

For a method with a defined optical path tolerance, specify that tolerance and its measurement conditions when selecting the Molded 0.01 option. The final requirement is agreed for the order.

This option uses Molded 0.01 fabrication. It is often chosen for applications that need tighter path-length selection, but solvent and cleaning suitability still depends on the complete assembled cell, including the closure and any contact parts.

Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning methods, and clean the optical faces gently with suitable non-abrasive laboratory tissue.

Included with this option

1 Quartz Screw-Top Cuvette and accompanying closure. The listed price is for 1 piece.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for changes involving path length, body geometry, optical layout, closures and fabrication requirements. If you need a different fit, send your drawing or holder details, the critical dimensions, sample conditions and required quantity through our contact page and refer to SKU MQQSC035.

Additional information

Weight100 g

Reviews

There are no reviews yet.

Be the first to review “(MQQSC035) Quartz Screw-Top Cuvette, 5 mm path, Large Screw Opening”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare