(C0.52CF) Quartz Standard Cuvette, 0.5 mm Path, 175 µL

Weight	30 g

SKU: C0.52CF

Original price was: $237.00.Current price is: $214.00.

In Stock

This JGS1 quartz standard cuvette combines a 0.5 mm optical path with a 175 µL nominal capacity in an open-top, two-way light format for UV/Vis work. The body measures 3 × 12.5 × 45 mm, with no closure included.

In Stock

SKU: C0.52CF Categories: Cuvettes, Products, Quartz Standard Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C0.52CF is a JGS1 quartz standard cuvette for UV/Vis measurements using a 0.5 mm optical path. It combines a 175 µL nominal capacity with a two-way light layout and an open-top body, giving you direct access to the sample chamber in a short-path format. This sale option is supplied without a closure.

Path Length: 0.5 mm
Sample Volume (Nominal): 175 µL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Standard Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	0.5 mm
Light Transmission Configuration	Two-Way Light
Sample Volume (Nominal)	175 µL
External Dimensions	3 × 12.5 × 45 mm
Cell Body Dimensions	3 × 12.5 × 45 mm
External Dimensions Scope	Body Only
Material	Quartz
Material Grade	JGS1
Closure Type	No Closure
Closure Included	No
Fabrication Method	Molded 0.01
Opening Configuration	Open Top

Choose this option

Choose C0.52CF when you need a 0.5 mm path in a standard quartz cell and want the sample chamber accessible from the top rather than covered by a supplied cap. The 175 µL nominal capacity suits small-volume work, and the body-only 3 × 12.5 × 45 mm geometry is the size to check when holder fit and top clearance matter.

What makes this option different

0.5 mm optical path: match the measurement method to this transmission distance and align the beam through the sample region.
Two-Way Light: align the opposing optical faces with the transmission beam and use the same orientation for blank and sample readings.
175 µL nominal capacity: plan the working fill and beam footprint together so liquid covers the illuminated region; nominal capacity is not a minimum working fill.
Open-top access: load and rinse through the sample opening, leaving room above the body for filling and any accompanying closure.
Molded 0.01 option: review the required optical-path tolerance and measurement conditions for your order when precision is central to the method.

Using this cell

Fill the cell from the open top and make sure the liquid covers the measurement region used by your instrument. The 175 µL value is the nominal capacity of the cell, not a minimum working volume, so the actual fill needed for your method depends on beam position and handling practice.

Because this version is supplied without a closure, it is best suited to methods where an open sample chamber is acceptable during loading and reading. Hold the cuvette by its non-optical outer surfaces and remove bubbles before measurement.

First-use check

Inspect the optical faces and top opening for chips, residue or transit damage.
Place the empty cell in your holder to confirm body fit before filling.
After filling, check that the beam passes through a fully covered, bubble-free sample region.

Fit and optical alignment

The listed 3 × 12.5 × 45 mm dimensions apply to the body only. Use them to check slot width, seating and vertical clearance in your holder or adapter before ordering.

Z Height is not established for this SKU, so instrument fit should not be assumed from path length alone where beam height is fixed. The two-way light arrangement refers to the transmission direction across opposing optical faces; it does not by itself establish compatibility with a specific instrument.

Solvents and cleaning

Molded 0.01 is used for custom selections where tighter path-length control may be important. For this exact item, chemical compatibility is not established in the available source, so sample, rinse and cleaning conditions should be reviewed against your own method before use.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the exterior optical faces gently with non-abrasive optical tissue.

Included with this option

No closure is included with this configuration. Confirm the cell quantity and any separately specified accessories covered by your order.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application. Prototype batches typically involve 2–4 cells; the final quantity, feasibility, specifications, price and production time are confirmed in the project quotation. Modified designs and prototype batches are quoted separately from the listed SKU. Discuss your requirements.