(C1002CS4) Glass Colorimetric Cuvette, 100 mm Path, 60 mL
6%
Original price was: $19.00.$18.00Current price is: $18.00.
C1002CS4 is a glass colorimetric cuvette with a 100 mm optical path, 60 mL nominal capacity and an open-top body for direct filling. Its long 104 × 20 × 40 mm format suits methods planned around an extended sample path rather than a compact routine cell. Sold as 1 cuvette per listed price unit.
In Stock
Description
C1002CS4 is a glass colorimetric cuvette for measurements that require a 100 mm optical path in a single long-body cell. The open-top chamber keeps filling and rinsing straightforward, and the 60 mL nominal capacity suits methods that use a larger sample volume than shorter cells normally take.
This option is sold as one cuvette. The 104 × 20 × 40 mm body format is an important part of the fit decision, especially when your holder or comparator has limited seating depth or surrounding clearance.
- Path Length
- 100 mm
- Sample Volume (Nominal)
- 60 mL
- Opening Configuration
- Open Top (Cell Body)
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Colorimetric Cuvette |
| Measurement Mode | Colorimetry |
| Pack Quantity | 1 Piece |
| Path Length | 100 mm |
| Light Transmission Configuration | Two-Way Light |
| Sample Volume (Nominal) | 60 mL |
| External Dimensions | 104 × 20 × 40 mm |
| Cell Body Dimensions | 104 × 20 × 40 mm |
| External Dimensions Scope | Body Only |
| Body Height | 40 mm |
| Base Dimensions | 104 × 20 mm |
| Material | Glass |
| Opening Configuration | Open Top (Cell Body) |
Choose this option
Choose C1002CS4 when your method needs a 100 mm path in a glass colorimetric cuvette and your setup has room for a long rectangular body. The open top is useful for repeated manual filling, emptying and rinsing during routine bench measurements.
What makes this option different
- 100 mm optical path for long-path colorimetric work.
- Glass body in the listed glass version of this long-format cell.
- Open-top chamber for direct access during filling and cleaning.
- 104 × 20 × 40 mm body-only size that should be checked against holder space and beam position.
Using this cell
Fill from the open top and make sure the liquid level fully covers the beam during measurement. Remove visible bubbles before reading, and keep the same orientation for blank and sample when your procedure depends on consistent positioning.
Handle the cuvette by the outer non-optical surfaces where possible. When emptying or rinsing, avoid striking the long body against hard edges.
First-use check
- Inspect the clear measuring faces for chips, scratches or residue.
- Test the empty cell in the holder to confirm seating and clearance.
- Rinse with a suitable liquid before first use.
- Run a blank at your normal fill level before routine measurements.
Fit and optical alignment
The stated body dimensions are 104 × 20 × 40 mm, with a 104 × 20 mm base footprint. Check both the holder footprint and the available length around the beam position before ordering, because this cell is much longer than compact short-path formats.
Z Height is not specified for this SKU, so instrument fit should not be assumed from path length alone. If your holder or comparator depends on a fixed beam height or restricted seating depth, verify that geometry before purchase.
Solvents and cleaning
Rinse promptly after use so residue does not dry on the optical faces or around the open rim. Clean with non-abrasive materials and wipe the clear measuring faces gently.
If your method uses unusual chemicals or cleaning solvents, review the full sample and cleaning conditions before use. For broader MQ construction guidance on other cell types, see Compare fabrication methods.
Included with this option
1 cuvette per listed price unit. If you need a supplied closure or other accessory, contact us before ordering.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
If you need a different path length, body size, sample volume or another cell geometry, we can review a custom project separately. Custom enquiries generally use JGS1 quartz rather than the listed glass SKU. Send your drawing or holder details through this contact page and reference C1002CS4.
Additional information
| Weight | 100 g |
|---|
You must be logged in to post a review.
You may also like…
8%
(C1002CS8) Glass Standard Cuvette, 100 mm Path, 35 mL
Original price was: $25.00.$23.00Current price is: $23.00.8%
(C1002CS7) Glass Standard Cuvette, 100 mm Path, 35 mL
Original price was: $25.00.$23.00Current price is: $23.00.9%
(C1002CA1) Glass Standard Cuvette, 100 mm Path, 35 mL
Original price was: $57.00.$52.00Current price is: $52.00.9%
(C1002CA) Glass Standard Cuvette, 100 mm Path, 35 mL
Original price was: $57.00.$52.00Current price is: $52.00.Related products
11%
(MQC378) Quartz Capillary Tubes (Square), Outer Dim.: 1x1mm, Inner Dim.: 0.3×0.3mm, Length: 25mm
Original price was: $19.00.$17.00Current price is: $17.00.15%
(MQC362) Quartz Capillary Tubes (Square), Outer Dim.: 0.5×0.5mm, Inner Dim.: 0.3×0.3mm, Length: 50mm
Original price was: $28.00.$24.00Current price is: $24.00.14%
(MQC372) Quartz Capillary Tubes (Square), Outer Dim.: 1.4×1.4mm, Inner Dim.: 1.1×1.1mm, Length: 100mm
Original price was: $38.00.$33.00Current price is: $33.00.14%
Reviews
There are no reviews yet.