(C102SS12) Quartz Flow Cell, 10 mm Path, 1.3 mL
10%
Original price was: $76.00.$69.00Current price is: $69.00.
C102SS12 is a quartz flow cell with a 10 mm optical path, 1.3 mL nominal capacity and two stoppered end openings. Its short 12.5 × 12.5 × 22 mm body suits UV/Vis flow work where you want a compact closed-body cell rather than a longer tube-projection format. Sold as 1 cell per listed price unit.
In Stock
Description
C102SS12 is a compact quartz flow cell for UV/Vis spectroscopy, combining a 10 mm optical path with a 1.3 mL nominal capacity in a short body format. The cell uses two opposed end openings with PTFE stopper material specified, which is useful when you want a closed-body flow cell and need to review the wetted closure material in the assembly.
The body dimensions are 12.5 × 12.5 × 22 mm, with 10 × 10 × 13 mm internal dimensions. This makes it easier to plan the optical cell body separately from any stopper projection or connected tubing arrangement.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 1.3 mL
- Opening Configuration
- Two Stoppered End Openings
Selection Specifications
| Product Kind | Flow Cell |
|---|---|
| Cell Type | Flow Cell |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 10 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 1.3 mL |
| Cell Body Dimensions | 12.5 × 12.5 × 22 mm |
| Internal Dimensions | 10 × 10 × 13 mm |
| Material | Quartz |
| Closure Type | Stopper |
| Closure Material | PTFE |
| Port Count | 2 |
| Opening Configuration | Two Stoppered End Openings |
Choose this option
Choose C102SS12 when your setup needs a standard 10 mm flow path in a short quartz body with access from the two ends rather than from fixed side tubes. It is a practical choice when fixture space is limited, when you want the body length defined independently from the closures, or when PTFE at the stopper position matters in your wetted assembly review.
What makes this option different
- 10 mm optical path: suited to UV/Vis methods that use a full 10 mm transmission path in a flow format.
- 1.3 mL nominal capacity: useful for planning the cell chamber volume separately from the rest of the connected liquid line.
- Two stoppered end openings: fluid access is arranged on the two opposing ends of the cell body.
- Short body format: the 22 mm body length helps when you need a compact cell body and want to check closure clearance separately.
Using this cell
Install the cell so the optical faces sit in the beam path, then arrange the two end openings to suit your liquid line or filling method. Fill gradually and inspect the illuminated region before measurement so bubbles or residue do not sit in the optical path.
The nominal 1.3 mL value applies to the cell chamber itself. Any tubing, fittings or added connectors in your setup will increase the total liquid volume in the full flow circuit.
First-use check
- Inspect the optical faces, body edges and stopper seating areas for chips, contamination or residue.
- Test the cell first with a suitable blank liquid and confirm that the optical region fills cleanly.
- Check that the installed cell fits the holder without forcing the body or closures.
Fit and optical alignment
The stated 12.5 × 12.5 × 22 mm dimensions describe the cell body only and do not include projecting stoppers. If your holder or compartment has tight end clearance, check the installed length with the stopper arrangement you intend to use.
Z Height is not stated for this cell. If your instrument requires a defined beam-center height, confirm that point before ordering rather than matching by body size alone.
Solvents and cleaning
This cell uses quartz with PTFE specified for the stopper material. Choose solvent and cleaning conditions for the complete wetted assembly rather than the quartz body alone.
Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Clean the optical faces gently with suitable non-abrasive optical tissue or lab wipes.
Compare fabrication methods if you need a different construction for your method.
Included with this option
1 cuvette per listed price unit. Contact us before ordering if you require a supplied closure or other accessory.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We can review custom JGS1 quartz flow cells for changes to dimensions, path length, sample volume, optical windows, Z Height, end-opening design and tolerance requirements. Send a dimensioned drawing or labelled sketch together with holder details, sample conditions and target quantity. Discuss your requirements and quote part number C102SS12.
Additional information
| Weight | 30 g |
|---|---|
| Dimensions | 1.25 × 1.25 × 2.2 mm |
You must be logged in to post a review.
You may also like…
10%
(C102SE2) Quartz Stoppered Cuvette, 10 mm Path, 3.5 mL
Original price was: $114.00.$103.00Current price is: $103.00.10%
(C102SE3) Quartz Stoppered Cuvette, 10 mm Path, 3.5 mL, Pack of 2
Original price was: $227.00.$205.00Current price is: $205.00.Related products
11%
(MQC370) Quartz Capillary Tubes (Square), Outer Dim.: 1.4×1.4mm, Inner Dim.: 1.1×1.1mm, Length: 25mm
Original price was: $19.00.$17.00Current price is: $17.00.15%
(MQC368) Quartz Capillary Tubes (Square), Outer Dim.: 0.9×0.9mm, Inner Dim.: 0.7×0.7mm, Length: 50mm
Original price was: $28.00.$24.00Current price is: $24.00.11%
(MQC361) Quartz Capillary Tubes (Square), Outer Dim.: 0.5×0.5mm, Inner Dim.: 0.3×0.3mm, Length: 25mm
Original price was: $19.00.$17.00Current price is: $17.00.15%
Reviews
There are no reviews yet.