(C104SR7) Quartz Stoppered Cuvette, 10 mm Path, 3.5 mL

Weight	30 g

SKU: C104SR7

Original price was: $151.00.Current price is: $136.00.

In Stock

C104SR7 is a JGS3 quartz stoppered cuvette with a 10 mm optical path, Four-Way Light access and 3.5 mL nominal capacity for infrared and fluorescence work. The square 12.5 × 12.5 mm body gives top filling with optical access from four sides, and a stopper is included for routine covered handling. Supplied as 1 cuvette per priced unit.

In Stock

SKU: C104SR7 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104SR7 is a JGS3 quartz stoppered cuvette built around a 10 mm optical path, Four-Way Light access and 3.5 mL nominal capacity. It is a practical choice when you need a full-size square cell for infrared or fluorescence work and want top access for filling together with a supplied stopper for routine covered handling. The 12.5 × 12.5 mm base and 45 mm body height also give you clear starting points for holder and compartment checks.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Closure Type: Stopper

Selection Specifications

Product Kind	Cuvette
Cell Type	Stoppered Cuvette
Measurement Mode	Infrared Spectroscopy; Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Wavelength Range — Lower Limit	300 nm
Wavelength Range — Upper Limit	3500 nm
Sample Volume (Nominal)	3.5 mL
Body Height	45 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Material Grade	JGS3
Closure Type	Stopper
Closure Included	Yes

Choose this option

Choose C104SR7 when your method is built around a 10 mm path but also benefits from optical access on more than two sides. The stoppered top gives direct access for filling and emptying, while the 3.5 mL nominal capacity suits routine sample volumes in a standard square-body format. This is also the option to choose when your setup needs the JGS3 quartz version identified for infrared and fluorescence use on this SKU.

What makes this option different

10 mm optical path for methods that are set up around this common cuvette length.
Four-Way Light configuration gives optical access from four side faces, which is useful when your measurement or observation geometry needs more than a simple front-and-back pair.
3.5 mL nominal capacity provides a routine sample chamber size in a full square cuvette body; it is a nominal volume, not a minimum working fill.
Top-access stoppered format lets you fill from above and place the stopper for normal covered handling between preparation and measurement.
JGS3 quartz body is the material grade specified here for infrared and fluorescence use on this exact SKU.
Fused integrated construction is the supplier’s construction description for this cell, useful when reviewing cleaning and sample-contact plans for the complete assembled cuvette rather than treating body material alone as the whole chemical answer.

Using this cell

Fill the cell from the top opening and seat the stopper gently after filling. Keep the same orientation for blank and sample if your method uses a defined optical direction or a preferred observation side.

Make sure the illuminated region is covered in your instrument, but do not treat the 3.5 mL nominal capacity as the minimum working volume. Before measurement, clear bubbles from the beam path and handle the cell by the non-optical surfaces where possible.

First-use check

Inspect the optical faces, top opening and stopper seating area for chips, residue or transport contamination.
Place the cell in your holder and confirm stable seating and the intended beam path before running samples.
Run a suitable blank in the same orientation you plan to use for measurement.

Fit and optical alignment

The bare body is 45 mm high with a 12.5 × 12.5 mm base. Those dimensions are useful for checking holder clearance and bench-top handling, but they do not establish the total height with the stopper in place.

Z Height is not established for this SKU, so beam-center fit should be checked against your holder or instrument requirement rather than assumed from the square outer body alone. Four-Way Light describes the supported side access pattern, not universal compatibility with every fluorescence or infrared instrument.

Solvents and cleaning

Quartz should not be used with hydrofluoric acid. Avoid hot strong alkalis and abrasive cleaning methods on the optical faces.

For this exact assembled cell, specific chemical limits are not established here. The supplier’s fused integrated construction note is most useful as a prompt to review your actual sample and cleaning conditions for the complete cell-and-stopper setup, especially if your method involves aggressive solvents, elevated temperature or long contact time. For general fabrication background, see our cuvette fabrication guide.

Included with this option

One C104SR7 cuvette with stopper included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz versions for changes to dimensions, optical path length, sample volume, optical windows or Z Height, closures and interfaces. Send a dimensioned drawing or labelled sketch together with holder details, sample conditions and quantity requirements.

Prototype batches typically involve 2–4 cells; feasibility, final specifications, price and production time are confirmed in the project quotation. Contact us about a custom version and quote part number C104SR7.