(C104SR8) Quartz Stoppered Cuvette, 10 mm Path, 3.5 mL, Pack of 2

Weight	30 g

SKU: C104SR8

Original price was: $300.00.Current price is: $270.00.

In Stock

C104SR8 is a JGS3 quartz stoppered cuvette with a 10 mm optical path, Four-Way Light access and 3.5 mL nominal capacity for infrared and fluorescence work. The square 12.5 × 12.5 mm body gives top filling with optical access from four sides, and this MQ listing is sold as a pack of 2 cuvettes.

In Stock

SKU: C104SR8 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104SR8 is a JGS3 quartz stoppered cuvette built around a 10 mm optical path, Four-Way Light access and 3.5 mL nominal capacity. It suits infrared and fluorescence work that benefits from optical access on four sides while keeping a familiar square-body format for filling and handling. This MQ offer is sold as a pack of 2 cuvettes.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Closure Type: Stopper

Selection Specifications

Product Kind	Cuvette
Cell Type	Stoppered Cuvette
Measurement Mode	Infrared Spectroscopy; Fluorescence Spectroscopy
Pack Quantity	Pack of 2
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Wavelength Range — Lower Limit	300 nm
Wavelength Range — Upper Limit	3500 nm
Sample Volume (Nominal)	3.5 mL
Body Height	45 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Material Grade	JGS3
Closure Type	Stopper
Closure Included	Yes

Choose this option

Choose C104SR8 when your method uses a 10 mm path and you want a stoppered square cuvette with side access beyond a two-window layout. The 3.5 mL nominal capacity suits routine sample volumes, and the top opening allows straightforward filling and rinsing before the stopper is placed for normal covered handling. It is also the current JGS3 quartz option on this SKU for infrared and fluorescence use.

What makes this option different

10 mm optical path supports methods designed around this standard cuvette length.
Four-Way Light configuration provides optical access from four side faces, which helps when your setup uses more than one viewing or excitation direction.
3.5 mL nominal capacity gives a routine chamber size in a full square-body cuvette; it is not a stated minimum working volume.
Stoppered top-access format allows direct filling and emptying from above, then routine covered handling once the stopper is placed.
JGS3 quartz is the material grade specified here for infrared and fluorescence measurement categories on this listing.
Fused integrated construction is the supplier’s construction description for this cell, which is useful when planning sample contact and cleaning choices for the assembled cuvette rather than assuming body material alone answers every chemical question.
Pack of 2 cuvettes preserves the current MQ priced sale quantity for this exact SKU.

Using this cell

Fill from the top opening and place the stopper gently after filling. Keep the same orientation for blank and sample if your method depends on a specific optical direction or observation side.

Cover the illuminated region in your instrument, but do not treat the 3.5 mL nominal capacity as the minimum required fill. Before measurement, remove bubbles from the beam path and wipe exterior droplets from the optical faces.

First-use check

Inspect the optical faces, chamber opening and stopper seating area for chips, residue or transport contamination.
Place the cuvette in your holder and confirm stable seating and the intended beam path before measurement.
Run a suitable blank in the same orientation planned for your sample.

Fit and optical alignment

The cuvette body has a 12.5 × 12.5 mm base and a 45 mm body height. Those dimensions help with holder-clearance checks, but they describe the bare body and do not establish the overall height with the stopper in place.

Z Height is not established for this SKU, so beam-center fit should be checked against your holder or instrument requirement. Four-Way Light describes the supported side-access layout of this cell; it should not be taken as proof of universal instrument fit.

Solvents and cleaning

Quartz should not be used with hydrofluoric acid. Avoid hot strong alkalis and abrasive cleaning methods.

For this exact assembled cell, specific chemical limits are not established here. The supplier’s fused integrated construction note is most useful when reviewing your actual sample and cleaning conditions for the complete cuvette-and-stopper setup, especially where aggressive solvents, elevated temperature or long contact time are involved. For general fabrication background, see our cuvette fabrication guide.

Included with this option

Pack of 2 C104SR8 cuvettes with stoppers included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application.

Prototype batches typically involve 2–4 cells; the final quantity, feasibility, specifications, price and production time are confirmed in the project quotation. Modified designs and prototype batches are quoted separately from the listed SKU. Contact us about a custom version and quote part number C104SR8.