(C104TE9) Quartz Micro Cuvette, 10 mm Path, 700 µL

Weight	30 g

SKU: C104TE9

Original price was: $475.00.Current price is: $428.00.

In Stock

C104TE9 is a JGS1 quartz micro cuvette for fluorescence measurements with a 10 mm optical path, Four-Way Light access and a 700 µL nominal capacity. Its 2 mm sample-region channel offers a more open measured region than the narrower related option, and closure is included. Sold as 1 cuvette.

In Stock

SKU: C104TE9 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104TE9 is a JGS1 quartz micro cuvette for fluorescence measurements with a 10 mm optical path and Four-Way Light access. This version pairs a 2 mm sample-region channel with a 700 µL nominal capacity, giving you a defined internal region that is less narrow than the 1 mm variant while staying within the same compact micro cuvette format. It is sold as 1 cuvette, with closure included.

Path Length: 10 mm
Sample Volume (Nominal): 700 µL
Closure Type: Screw Cap

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Optical Window Dimensions	2 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	700 µL
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Screw Cap
Closure Included	Yes
Fabrication Method	Molded 83
Detection Channel Width	2 mm

Choose this option

Choose C104TE9 when you need the 10 mm fluorescence cuvette format but want a 2 mm sample region rather than the narrowest channel version. That geometry can be useful when your method needs a defined internal measurement zone without moving to a larger nominal capacity than necessary. Four-Way Light access also supports fluorescence layouts that use optical access from multiple sides.

What makes this option different

10 mm optical path for methods built around this path length.
2 mm sample-region channel for a defined internal measurement region.
700 µL nominal capacity in a compact micro cuvette body.
Four-Way Light layout for optical access from multiple sides.
Closure included with the single-cuvette sale unit.

Using this cell

Fill the cuvette so the illuminated region is covered during measurement, and keep bubbles, dried residue and fingerprints away from the optical faces. Use the same orientation for blank and sample measurements so the beam passes through the same internal region each time.

The included closure is useful when you want the sample covered during handling. Tighten it gently and keep the contact surfaces clean. The 700 µL figure is the nominal capacity of the cell, not a minimum working volume.

First-use check

Inspect the body, optical faces and closure contact surfaces for chips or residue.
Test the cuvette in the holder before preparing valuable samples.
Run a blank and confirm that the beam passes through the intended filled region.

Fit and optical alignment

The confirmed base dimensions are 12.5 × 12.5 mm, which helps with holder planning at the base. Z Height is not established for this option, so holder fit and beam-center alignment should be checked against your actual instrument geometry rather than assumed from the base size alone.

The stated 2 mm dimension refers to the sample-region channel width. It is useful for checking whether your beam footprint suits the internal measurement region, but it is not an instrument slit setting.

Solvents and cleaning

This cuvette uses Molded 83 fabrication. This construction is commonly selected for methods that may involve organic solvents or temperature-controlled work, but suitability still depends on the complete assembly and your actual chemical conditions.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Clean the optical faces gently with non-abrasive optical tissue, and use a cleaning routine suitable for both the quartz body and the closure.

Included with this option

Supplied as 1 micro cuvette. Closure is included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz cuvettes for changes involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication. Send a dimensioned drawing or labelled sketch together with holder details, sample conditions and target quantity. Prototype batches typically involve 2–4 cells; final specifications, price and production time are confirmed in quotation. Discuss your requirements and quote C104TE9.