(C104CS67) Quartz Micro Cuvette, 10 mm Path, 1.05 mL

Weight	30 g

SKU: C104CS67

Original price was: $72.00.Current price is: $65.00.

In Stock

Quartz micro cuvette for fluorescence spectroscopy with a 10 mm optical path, Four-Way Light access and 1.05 mL nominal capacity. This Standard 80 adhesive-bonded option uses a 3 mm sample-region channel and is intended for neutral sample solutions. Sold as 1 cuvette per price unit, with a closure included.

In Stock

SKU: C104CS67 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104CS67 is a quartz micro cuvette for fluorescence work with a 10 mm optical path in a compact square-body format. Its Four-Way Light layout, 3 mm sample-region channel and 1.05 mL nominal capacity make it a balanced middle option in this series when you want more chamber width than the narrowest version without moving to the broadest channel. This version uses Standard 80 adhesive-bonded quartz construction for neutral sample solutions.

Path Length: 10 mm
Sample Volume (Nominal): 1.05 mL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	Fluorescence Spectroscopy
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Optical Window Dimensions	3 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	1.05 mL
External Dimensions	12.5 × 12.5 × 45 mm
Cell Body Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Closure Type	Lid
Closure Included	Yes
Fabrication Method	Standard 80
Detection Channel Width	3 mm

Choose this option

Choose this cell when your fluorescence method needs optical access from all four sides and a 3 mm sample region within the standard 10 mm cuvette format. It suits users comparing chamber width and nominal capacity across the family while keeping the same uncapped outer body size for holder planning and repeatable orientation.

What makes this option different

10 mm optical path for standard cuvette-based fluorescence measurements.
Four-Way Light design for optical access through all four side faces in compatible fluorescence geometries.
3 mm sample-region channel paired with 1.05 mL nominal capacity.
Standard 80 adhesive-bonded quartz construction for neutral sample solutions.
Closure included; sold as 1 cuvette per listed price unit.

Using this cell

Fill from the top opening and keep the beam path fully covered during measurement. For stable readings, keep the optical faces clean, avoid bubbles in the illuminated region, and use the same orientation for blank and sample measurements.

Place the closure gently after filling. It is part of the supplied set for routine use, but this listing does not define a pressure limit or a leak-tight closed-system condition.

First-use check

Inspect the optical faces, opening and closure seating area before first use. Then test the cell in the intended holder with a blank to confirm seating, top clearance and a suitable fill level for your measurement geometry.

Fit and optical alignment

The listed 12.5 × 12.5 × 45 mm dimensions are for the uncapped body. Use that footprint when checking holder fit, and allow extra top clearance once the closure is fitted.

Z Height is not specified for this SKU. If your instrument depends on a defined beam-center height, check that requirement before ordering. The 1.05 mL value is nominal capacity only, not the minimum fill needed to cover the beam in your setup.

Solvents and cleaning

This Standard 80 adhesive-bonded option is intended for routine water-based samples and buffers at room temperature. For this SKU, the supplier restricts use to neutral sample solutions. Specific solvent, concentration, temperature and exposure-time limits are not stated.

Avoid organic sample solvents and organic cleaning agents with this cell. Do not use hydrofluoric acid on quartz, and avoid hot strong alkalis and abrasive cleaning methods.

Included with this option

1 cuvette per listed price unit. Closure included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz versions for changes involving dimensions, optical path length, sample volume, optical windows, Z Height, closures, fabrication and tolerances. Discuss your requirements and quote part number C104CS67.