(C104CS100) Quartz Micro Cuvette, 10 mm Path, 1.75 mL

Weight	30 g

SKU: C104CS100

Original price was: $72.00.Current price is: $65.00.

In Stock

Quartz micro cuvette for fluorescence spectroscopy with a 10 mm optical path, Four-Way Light access and 1.75 mL nominal capacity. This Standard 80 adhesive-bonded option uses a 5 mm sample-region channel and is intended for neutral sample solutions. Sold as 1 cuvette per price unit, with a closure included.

In Stock

SKU: C104CS100 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104CS100 is a quartz micro cuvette for fluorescence work that uses a standard 10 mm optical path in a compact square-body format. Its Four-Way Light layout, 5 mm sample-region channel and 1.75 mL nominal capacity make it the broader-channel option in this series when you want more space in the sample region while keeping the same basic body size for holder planning. This version is made in Standard 80 adhesive-bonded construction and is intended for neutral sample solutions.

Path Length: 10 mm
Sample Volume (Nominal): 1.75 mL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	Fluorescence Spectroscopy
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Optical Window Dimensions	5 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	1.75 mL
External Dimensions	12.5 × 12.5 × 45 mm
Cell Body Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Closure Type	Lid
Closure Included	Yes
Fabrication Method	Standard 80
Detection Channel Width	5 mm

Choose this option

Choose this cell when your fluorescence setup needs optical access from all four side faces and you want the 10 mm path length in a micro cuvette with a relatively broad 5 mm sample region. It suits routine methods where the nominal 1.75 mL chamber size fits your loading range, and where the compact 12.5 × 12.5 × 45 mm uncapped body helps you work within standard square-cell holder space.

What makes this option different

10 mm optical path for standard cuvette-based fluorescence measurements.
Four-Way Light design for optical access through all four side faces in compatible fluorescence geometries.
5 mm sample-region channel paired with 1.75 mL nominal capacity.
Standard 80 adhesive-bonded quartz construction for neutral sample solutions.
Closure included; sold as 1 cuvette per listed price unit.

Using this cell

Fill from the top opening and place the closure after loading. During measurement, keep the illuminated region fully covered and keep the optical faces free from droplets, residue and bubbles.

Use the same orientation for blank and sample runs so the beam passes through the same faces each time. The 1.75 mL figure is nominal capacity, not a minimum working volume, so set the fill level according to your own beam position and measurement geometry.

First-use check

Inspect the optical faces, top opening and closure seating area before first use. Then place the cell in the intended holder and run a blank to confirm stable seating, beam coverage and a practical fill level for your instrument.

Fit and optical alignment

The listed 12.5 × 12.5 × 45 mm dimensions apply to the uncapped cell body. That helps with holder checks, but you should allow extra clearance for the fitted closure rather than treating the body size as the full installed envelope.

Z Height is not specified for this SKU. If your fluorimeter or holder depends on a defined beam-center height, check that point before ordering instead of assuming compatibility from the outer body dimensions alone.

Solvents and cleaning

This Standard 80 adhesive-bonded option is intended for routine water-based samples and buffers at room temperature. For this SKU, the supplier restricts use to neutral sample solutions. Specific solvent, concentration, temperature and exposure-time limits are not stated.

Avoid organic sample solvents and organic cleaning agents with this cell. Do not use hydrofluoric acid on quartz, and avoid hot strong alkalis and abrasive cleaning methods.

Included with this option

1 cuvette per listed price unit. Closure included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz versions for changes involving dimensions, optical path length, sample volume, optical windows, Z Height, closures, fabrication and tolerances. Discuss your requirements and quote part number C104CS100.